Do you have a question about the Seashell Pet Water Fountain and is the answer not in the manual?
Questions and answers
Summary of Contents for All Fur You Seashell Pet Water Fountain
Page 1
SEA SHELL PET WATER FOUNTAIN Thank you for your purchase of an All Fur You Whisper Water Fountain. In order to ensure the safe operation and maximum life of your product, please take the time to read these instructions before use and store for future reference.
Page 2
PRODUCT SPECIFICATIONS: Product Name: Seashell Pet Water Fountain Input Voltage: AC 100-240V 50-60Hz Output Voltage: AC 12V Pump: Ultra low noise AC Pump Power Consumption: 2W Product Dimensions: 290mm(L) x 295mm(W) x 220mm(H) 1 1.4in(L) x 1 1.6in(W) x 8.66in(H) Product Weight: 1.5kg (5oz)
Page 4
Q & A TROUBLESHOOTING How Frequently do I need to change the filter? The charcoal filter and foam filter should be changed every 2-4 weeks depending on the number of pets using the fountain. Having more pets will increase the saliva content and food debris in the water, so the filter will need to be changed more frequently.
Page 5
How long with the fountain pump last? The fountain runs a long life AC Pump. The pump normally lasts between 2.5 and 4 years (>20,000 hours). If the pump has been in regular use for approximately this time period, it will need replacing. We provide a full 1 year warranty for the pump.
Page 6
ASSEMBLY OF THE PUMP & LID 1. 1 Take the bowl and place the pump inside the bowl. (It may have already been set up when packaged.) 1.2 Feed the in-line plug of the electrical power cord over and through the raised post and out the notch on the right.
Page 7
1.4 Place the water bowl on the drinking bowl and the LED Light passes through the water bowl. 1.5 Install LED Light under water outlet of the water tower liner.
Page 8
1.6 Place the water tower liner in the water bowl. 1.7 Place the lid on the water bowl.
Page 9
ASSEMBLY OF THE FILTER & SPOUT 2. 1 Rinse the charcoal filter thoroughly in cold water to help remove any excess or loose charcoal dust. 2.2 Place the filter on top of the lid and press down firmly.
Page 10
WATER FILLING & POWER ON 3. 1 Add water as necessary, the maximum water level is located on the top of the filter. Connect the power cord to the wall adapter and insert into the electrical outlet. 3.2 Setting the Water Flow: Adjust the valve to control the water.
PUMP MAINTENANCE Cleaning the pump is essential for the longevity of the fountain. Clean at least every 2 weeks 1. Remove the pump cover 2. Remove the impeller cap by placing your fingernail underneath the small lip. 3. Remove the impeller and clean the parts with mild soap and warm water.
Page 12
All Fur You is a brand proudly brought to you by Select Trading Pty Ltd allfuryou.com support@allfuryou.com /allfuryoupets @allfuryou...
WARRANTY This limited warranty is provided by Select Trading Pty Ltd to you as the original purchaser of the All Fur You branded product(s) (the "Product"). The Product may be manufactured by a third party not affiliated with Select Trading Pty Ltd.
Need help?
Do you have a question about the Seashell Pet Water Fountain and is the answer not in the manual?
Questions and answers