Bledsoe AXIOM Application Instructions

AXIOM Ankle Brace
Application Instructions
020192 Rev A 04/08
CP
Stable...yet flexible.
Support...without restriction.
Seamless fit in the shoe...and on the ankle.
Low ankle/high ankle protection.
1.

Step 1: Detach Over-Center Buckles

Open the over-center buckles by pinching
the two gray tabs on the buckles.
_________________________________________
2.

Step 2: Place in Shoe

a. Place brace in the shoe. It can be
placed on top of the shoe's innersole or
under a thin innersole.
b. Tilt the uprights back toward the heel.
3.
a. a.

Step 3: Place Foot into the Shoe

With the shoe fully unlaced, slip foot into
the shoe.
_________________________________________
4.
b.

Step 4: Detach the Uprights

Detach the hook and loop fastener at the
back of the calf where the two uprights
are held together.
5.
a.
b.

Step 5: Position the Uprights

a. Align the medial upright with the ankle
bone.
b. While holding the medial upright, align
the lateral upright and attach the hook
and loop fastener at the back of the calf.