Download Print this page

Sealey HVF30S Instructions page 2

Industrial high velocity orbital drum fan 30"

Advertisement

When not in use place the fan in its original box, or otherwise cover, to protect from dust and store in a safe, dry, childproof
location.
NOTE: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
2. INTRODUCTION
High velocity industrial drum fans suitable for movement of huge volumes of air. Robust unit with heavy-duty gauge steel casing, guard and
frame. Featuring a 360° tilt function allowing for the direction of air flow to be positioned anywhere on a 360° axis. Carefully balanced and fully
guarded blades provide quiet and safe operation. Fitted with BS fully approved plug. Suitable for use in industrial, commercial, agricultural,
automotive workshop and showroom applications.
3. SPECIFICATION
Model No. ..............................................................................................................HVF30S
Fan Diameter ....................................................................................................760mm(30")
Speeds .............................................................................................................................. 2
Speed Range ...............................................................................................1250-1350rpm
Maximum Airflow .............................................................................240mtr³/min (8475cfm)
Power ..................................................................................................................300-350W
Supply..........................................................................................................................230V
Current.......................................................................................................................... 1.5A
4. OPERATION
WARNING! Ensure that you read, understand and apply safety instructions
in Section 1 before using fan.
4.1.
Check that the speed control is set to "0" (off) and then plug into the mains power
supply and switch the power on.
4.2.
The fan features 2 speeds which are selectable using the switch located at the
back of the fan above the motor.
4.3.
Adjust the direction of the air flow by rotating and tilting the fan up or down as
required.
4.4.
When you have finished using the fan ensure you turn the speed control switch
to "0" (off) and disconnect the fan from the mains power.
5. CARE
WARNING! Ensure that the fan is disconnected from the mains power supply
before attempting any of the following:
5.1.
Use a soft, damp cloth to clean the fan.
DO NOT immerse the fan in water and never allow water to drip onto the motor
housing. DO NOT use solvents, petroleum, paint thinner or other chemicals to
clean the fan.
5.2.
To clean the fan blade, undo the cross headed screws around the circumference,
remove the grille and clean the blade with a slightly damp cloth.
Replace the grille as required and refit the cross headed screws.
5.3.
Should the motor, switch or the power lead require service or maintenance contact
your local service agent.
5.4.
When not in use place the fan in its original box or otherwise cover to protect
from dust, and store in a safe, dry, childproof location.
Parts support is available for this product. To obtain a listing and/or diagram, please log on to: www.sealey.co.uk,
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
email: sales@sealey.co.uk or phone: 01284 757500
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
01284 757500
01284 703534
www.sealey.co.uk
sales@sealey.co.uk
HVF30S Issue: 1 - 05/01/15

Advertisement

loading