Kyoto Francisco Assembly Instructions

Downloaded from www.futonsofabedsdirect.co.uk
Francisco/Jasmin Futon
Assembly Instructions
82 cm
1. Before attempting to assemble or install this product read and follow the instructions
in this leaflet and on any attached labels!!
2. NEVER ALLOW CHILDREN TO PLAY WITH OR OPERATE THE FOLD OUT BED
ACTION.
3. Routine Maintenance:
Periodically check that all fixtures and connectors are tight.
Check the bed action operates smoothly, maintaining the bed in the correct position.
Check components for signs of damage.
4. Do not stand hot products directly on the wood surface.
5. Mop up any spills immediately.
6. Surface of wood is not resistant to bleaches, acids, or other "aggressive" agents.
7. Never use substitute parts. Always contact the supplier for replacement parts:
We suggest you spend a short time reading through this leaflet, then follow the simple step by step instructions.
Some parts are viewed differently from the exploded drawing shown; this is for extra clarity.
To avoid scratching, we advise that assembly takes place on a protected surface.
Do not discard any of the packaging, until you have checked all the parts and the pack of fittings.

SAFETY WARNINGS / CARE OF PRODUCT

Kyoto Futons Ltd. Tel: 01778 380555 / Fax: 01778 380444

Before Starting Assembly

Use 2 people and assemble
unit close to its final position.
Assembly time: 1 hour approx.
© Kyoto Futons Ltd. 040902