Advertisement
Quick Links
LED Linear Pendant Lights
MODEL
LPL-2FT-30W | LPL-4FT-60W (Linkable)
CAUTION
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or use of this product, consult a competent electrician.
INSTALLATION GUIDE
Fig.1
Fig.3
info@ortechindustries.com
www.ortechindustries.com
WARNING
WARNING — THE INSTALLATION MUST BE CARRIED OUT BY
A QUALIFIED ELECTRICIAN.
1. LED Linear Pendant Lights are suitable for using in dry and damp locations
2. Please keep the LED Linear Pendant Lights away from any corrosive substance, and
please use dry cloth when you clean it
3. LED Linear Pendant Lights can only be installed by a qualified electrician
4. Before installation or maintenance, please disconnect the power to prevent electric shock
Fig.2
Fig.4
13376 Comber Way
Surrey BC V3W 5V9
375 Admiral Blvd
Mississauga
,
ON L5T 2N1
Instruction Manual
1. Screw the canopies to
the ceiling (see Fig.1)
2. Screw the suspended
cable to the fixture
(see Fig.2)
3. Pass the hanging cable
through the hanging
kit by pressing its
spring (see Fig.3)
4. Connect the power
wire to the main power
supply (see Fig.4)
1-888-543-6473
1-888-541-6474
Advertisement
Related Manuals for Ortech LPL-2FT-30W
Summary of Contents for Ortech LPL-2FT-30W
- Page 1 LED Linear Pendant Lights Instruction Manual MODEL LPL-2FT-30W | LPL-4FT-60W (Linkable) WARNING WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN. 1. LED Linear Pendant Lights are suitable for using in dry and damp locations 2. Please keep the LED Linear Pendant Lights away from any corrosive substance, and please use dry cloth when you clean it 3.
- Page 2 LED Linear Pendant Lights Instruction Manual MODEL LPL-2FT-30W | LPL-4FT-60W (Linkable) INSTALLATION GUIDE Linkable Options Fig.1 Fig.2 Fig.3 Fig.4 1. Punch off the knock-out hole and pull out the quick connector of each light (see Fig.1 and Fig.2 above) 2. Connect the quick connectors and fix the fixtures together with the metal brackets (see Fig.3 and Fig.4 above)