Advertisement
Step 1
Remove the dirty filter
from your jacuzzi, whirlpool
or hot tub according to the
operating instructions.
1
Step 2
Place the filter in the
Estelle. Connect the appli-
ance to the water supply
and open the tap.
The first part of the filter
cleaning process begins,
2
automatically, on water
pressure alone.
Step 3
When the first part of the
cleaning is complete, turn
the knob on the appliance
so that the second part
of the cleaning process
begins.
3
Step 4
Depending on the size of
the filter to be cleaned,
the entire process is com-
pleted in about 1 minute.
Put the filter back in your
jacuzzi, whirlpool or hot
4
tub and empty the Estelle.
www.estelle-dcs.com
• Cleans thoroughly
• Fast, safe and simple
• Filters last longer
• Save hundreds of euros
Advertisement
Table of Contents
Related Manuals for ESTELLE DCS
Summary of Contents for ESTELLE DCS
- Page 1 Put the filter back in your cleaning process begins, jacuzzi, whirlpool or hot • Cleans thoroughly automatically, on water tub and empty the Estelle. • Fast, safe and simple pressure alone. • Filters last longer • Save hundreds of euros...
- Page 2 That works out to easily hundreds of euros per patented filter cleaning system allows year. You also use about 80% less water with Estelle than with other cleaning methods. Estelle can extend the life you to clean the filters of your jacuzzi, of your filters by cleaning them up to at least 150 times.
Need help?
Do you have a question about the DCS and is the answer not in the manual?
Questions and answers