Table of Contents
Advertisement
2.1
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VE276Q/VK276Q Series LCD monitor is specially
designed for VESA wall mount.
To detach the arm/stand:
1.
Disconnect power and signal cables. Carefully put the front of the monitor
face down on a clean table.
2.
Use a screwdriver to remove the two screws that secure the stand to the
monitor.
3.
Detach the stand from the monitor.
•
•
•
•
2-1
W e recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
H old the stand of the monitor while removing the screws.
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load 7.9
Kg (Screw size: 4 x 12 mm).
Chapter 2: Setup
Hide quick links:
Advertisement
Table of Contents
