Advertisement
OPERATING MANUAL
DMX Booster/Splitter 3402B-H Mk1
(C) SOUNDLIGHT 1996-2019 * ALL RIGHTS RESERVED * NO PART OF THIS MANUAL MAY BE RE-
PRODUCED, DUPLICATED OR USED COMMERCIALLY WITHOUT THE PRIOR WRITTEN CONSENT OF
THE OWNER *
ALL STATEMENTS WITHIN THIS MANUAL HAVE BEEN CHECKED CAREFULLY AND
ARE BELIEVED TO BE ACCURATE, HOWEVER SOUNDLIGHT DOES NOT ASSUME ANY RESPONSIBI-
LITY FOR ERRORS OR OMISSIONS. * THE USER HAS TO CHECK THE SUITABILITY OF THE EQUIP-
MENT FOR THE INTENDED USE. SOUNDLIGHT EXPRESSLY EXCLUDES ANY RESPONSIBILITY FOR
DAMAGES - DIRECT OR INDIRECT - WHICH MAY OCCUR DUE TO MISUSE, UNPROPER INSTALLA-
TION, WRONG OPERATING CONDITIONS AND NON-COMPLIANCE TO THE INSTRUMENT'S INSTRU-
CTIONS, AS WELL AS IGNORANCE OF EXISTING SAFETY REGULATIONS.
SOUNDLIGHT
The DMX Company Bennigser Str. 1
D-30974 Wennigsen
Tel +49-5045-912 93-11
Advertisement
Table of Contents
Summary of Contents for SOUNDLIGHT 3402B-H Mk1
- Page 1 OPERATING MANUAL DMX Booster/Splitter 3402B-H Mk1 (C) SOUNDLIGHT 1996-2019 * ALL RIGHTS RESERVED * NO PART OF THIS MANUAL MAY BE RE- PRODUCED, DUPLICATED OR USED COMMERCIALLY WITHOUT THE PRIOR WRITTEN CONSENT OF THE OWNER * ALL STATEMENTS WITHIN THIS MANUAL HAVE BEEN CHECKED CAREFULLY AND ARE BELIEVED TO BE ACCURATE, HOWEVER SOUNDLIGHT DOES NOT ASSUME ANY RESPONSIBI- LITY FOR ERRORS OR OMISSIONS.
- Page 2 Thank you for choosing a SOUNDLIGHT device. The SOUNDLIGHT DMX Splitter/Booster 3402B-H is a highly sophisticated device, which was designed to buffer and distribute DMX light control signals complying with USITT DMX-512/1990 or DIN 56930/2, ANSI E1-11 DMX512-A and ANSI E1-20 dMX RDM, respectively. The unit can be used with all standard light con- trol systems.
-
Page 3: Power Supply
CONNECTORS The booster/splitter is using cage clamp terminals for both, input and output. This type of connector is very reliable, ruggedized and easy to use. Use a flat blade screwdriver only. To open, press lever, insert cable and release. For stranded wires, we suggest to use (insulated) ferrules. The DMX data outputs are optically isolated in respect to to the DMX signal input. -
Page 4: Technical Data
The warranty is limited to repair or exchange of the hardware product; no fur- ther liability is assumed. SOUNDLIGHT is not responsible for damages or for loss of data, sales or profit which arise from usage or breakdown of the hardware product. In Germany, SOUNDLIGHT will repair or re- place established defects in hardware, provided that the defective part is sent in, freight paid, through the responsible dealer along with warranty card and/or sales receipt prior to expiration of warranty. -
Page 5: Internet-Hotline
INTERNET-HOTLINE Please check our internet domain http://www.soundlight.de for new versions, updates etc. If you have any comments which may be worth considering, please send a message to info@soundlight.de. PRODUCT INFO The product info page can be found at: www.soundlight.de/produkte/3402b-h...
Need help?
Do you have a question about the 3402B-H Mk1 and is the answer not in the manual?
Questions and answers