Advertisement
Installation Guide for Beam Single Mode
Whip Antenna (RST714B)
Applications
4WD
Antenna Installation is critical for optimum performance of your Iridium service.
Installation Guidelines
To ensure maximum performance of the antenna system and to maximise availability and reliability of service the
antenna must;
•
mount antenna vertically
•
have a clear line of site to the sky
•
be clear and free of obstructions
•
be located away from other transmitting devices
•
be securely attached to a flat ferrous surface
•
be located outdoors
•
be installed with a Beam certified cable
Installing Antenna Cables
When installing antenna cables, follow these guidelines:
•
Route and restrain cables to prevent them from vibrating or moving under normal conditions, which could result in
damage to the antenna or the coaxial cable connections.
•
Wherever the cables contact structures, protect the cables from chafing or abrasion. If a cable needs to be bent, avoid
kinking it, and ensure that each bend radius follow the cable specification limits.
Package Contents
Single Mode Whip Antenna (includes 5 m / 16.4 ft Cable)
Recommended Antenna Installation location
UTE
For more information please visit: beamcommunications.com
TRUCK
8
o
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Beam RST714B
Summary of Contents for Beam RST714B
- Page 1 • be located outdoors • be installed with a Beam certified cable Installing Antenna Cables When installing antenna cables, follow these guidelines: • Route and restrain cables to prevent them from vibrating or moving under normal conditions, which could result in damage to the antenna or the coaxial cable connections.
- Page 2 6. Set the antenna on the mounting plate and screw in the hex locking nut. Use an adjustable wrench to tighten the nut. The antenna should be stable while mounted. 7. Finally, connect the TNC connector to the Beam Iridium terminal or accessory. For more information, please scan the barcode or visit beamcommunications.com...
Need help?
Do you have a question about the RST714B and is the answer not in the manual?
Questions and answers