Adaptation To A Hunter's Rifle - Dedal-NV 450 Operation Manual

1. Take off (оpen) the cover of the objective.
2. Turn on the device - position ON of the switch (8). Green light should appear on the
screen (the device works in a passive mode).
3. Turning the eyepiece (3), reach the sharpest image of the reticle. The brightness of the
reticle can be adjusted by the switch (9).
4. Choose the object of observation and focus the objective of the device with the handle
(10) till the receipt of maximally clear, distinct and sharp image of the observed object.
5. When illumination of the observed object is required, turn on (8) IR illuminator (active
mode). You can select one of the three positions changing the illuminator's power (10, 25
or 75 mW). The direction of glow of IR illuminator could be adjusted by moving body of
the illuminator in vertical direction. In addition, with the help of rolling IR lens, the glow
could be adjusted in full-circle, which allows to move IR plash directly to the centre of
the screen.
6. Having finished the work, turn the ON / OFF switch (8) to the position OFF.
7. Close the cover of the objective after you have finished the work the device.
Recommendation.
When the device is stored for a long time it is recommended not to leave batteries in
the compartment of the device in order to avoid leakage of the batteries.
Your night vision device Dedal-450 can be used as hunter's night vision riflescope.
Recommendation.
We recommend you to specify the order of usage of the hunter's scope on your rifle
with the local competent authorities.
Your night vision device Dedal-450 can be used with different types of mounts,
providing reliable fixation of the device on the particular rifles. Manufacturers of civil
rifles do not possess uniform standards for a mounting place of optical devices, and as a
result universal fastening device is not available. The device Dedal-450 is supplied with a
fastening mount without hard fastening to the body, in most cases allowing the
performance of special adaptation of the device for a particular model of rifles. For this
purpose you should address to a specialized rifle workshop or implement the fastening
yourself, if you possess enough qualification, following "The rules of adaptation of
"Dedal" night vision riflescopes".
8
Do not forget to turn off the device after use!

Adaptation to a hunter's rifle

EAW (Apel) mount.