Download
Share
Print this page
Barbeques Galore Dakota Extension Table DAKEXTT250L Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Barbeques Galore Manuals
  4. Indoor Furnishing
  5. Dakota Extension Table DAKEXTT250L
  6. Assembly instructions manual

Barbeques Galore Dakota Extension Table DAKEXTT250L Assembly Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
ASSEMBLY INSTRUCTIONS
DAKOTA EXTENSION TABLE
DAKEXTT250L
PRODUCT CODE:
Imported by Barbeques Galore Australia
For assistance with assembly please contact your nearest store:
Phone: 1 800 978 555 or
e-mail customer service:
customercare@bbqgalore.com.au
1
DAKEXTT250L

Advertisement

loading

Summary of Contents for Barbeques Galore Dakota Extension Table DAKEXTT250L

  • Page 1 ASSEMBLY INSTRUCTIONS DAKOTA EXTENSION TABLE DAKEXTT250L PRODUCT CODE: Imported by Barbeques Galore Australia For assistance with assembly please contact your nearest store: Phone: 1 800 978 555 or e-mail customer service: customercare@bbqgalore.com.au DAKEXTT250L...

  • Page 2: Pre-Assembly Preparation

    PRE-ASSEMBLY PREPARATION Before you start: Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. Take care when lifting. Assembly should be done as near as possible to the final position. Ensure that you have all required parts for complete assembly. Read the assembly instructions fully and carefully before beginning assembly.

  • Page 3: Parts List

    PARTS LIST TABLE TOP TABLE LEG LONG SCREW LEG CAP M10 NUT SPRING WASHER FLAT WASHER TOOL DAKEXTT250L...
  • Page 4 ASSEMBLY INSTRUCTIONS STEP 1: Fit the LONG SCREWS (C) Important: When moving the table and/or table top, lift and carry by the support frame only, as lifting by the glass pieces may damage the table and/or the mechanism. With the help of another person carefully place the TABLE TOP [A] upside down on a soft clean surface e.g.
  • Page 5 ASSEMBLY INSTRUCTIONS (continued) STEP 2: Fit the Legs (B) Each leg has one open end and the other end has a flat plate. The open end joins to the table frame. Take one TABLE LEG [B] slide it over a long screw. Align the long screw to come through the hole in the flat plate at the end of the leg.
  • Page 6 ASSEMBLY INSTRUCTIONS (continued) STEP 3: Turn the table upright (NEEDS TWO PEOPLE): Once all legs are fitted, with the help of another person, carefully roll the table onto its long side. Make sure the edge is resting on something soft like a blanket or some cushions. With each person anchoring a lower table leg with their foot, carefully roll the table over to its upright position.
  • Page 7 OPERATING INSTRUCTIONS Note that to open the extension, there are two toggles that are factory set to the locked position. They are located under the table, past the slide action, one on each side of the table. The first time you will probably need to look under table to locate them. After the first time, you will know where they are.
  • Page 8 OPERATING INSTRUCTIONS (continued) Once both toggles are in the unlocked (down) down position you can now open and close the extension as desired. To open the extension: Stand at one short end of the table. With two hands, one on each long side of the table, pull the table top back towards you and step slowly backwards.
  • Page 9 OPERATING INSTRUCTIONS (continued) To close the extension, first unlock both toggles then stand at one short end of the table. With two hands, one on each long side of the table, gently pull the table top back towards you a little. The extension will start to lower.

  • Page 10: Care And Maintenance

    CARE AND MAINTENANCE A little care and maintenance will help extend the life and maintain the appearance of your table. When it is not in use, protection from direct exposure to the elements, falling tree sap and pollen, bird droppings etc. will make a significant difference to the appearance of your table. DAKOTA Construction Frame: Powder coated aluminium...