Advertisement
Quick Links
Range locks with a keypad interface are operated by a 4-digit User Code or by an ADA compliant User Key. Management staff uses Manager
Flex Key(s) for locker access and audit/inspection.
Body Style
Standard
Lock Parts
Front Unit
C Button
Key Slot
Oval
Keys
Operates the lock
Overrides user access
Allows management inspection
Provides external power
Setup
Locks are shipped with factory default settings (only operates by pressing
1
Make sure the door is open
and the lock is in the unlocked
position.
1
Product Guide
Vertical
Oval
LED Usage Indicator
Alpha Numeric
Keypad
Key Button
User Key
•
2
Touch the Manager Flex Key
to the key slot until a two-tone
beep is heard.
Keypad Interface
Flex Key Managed - E Function
Range is available in three body styles: Standard, Vertical, and Oval.
Rear Unit
Cover Plate
Cover Plate Screw
Manager Flex Key
•
•
•
•
). Setup must be completed to allow full operation.
= `
3
Repeat above steps for each
lock.
Shared Use Functionality
½" (12.7 mm)
Cable
Deadbolt
Lock Mounting
Holes
Pin
Connection Option
Key Insertion
NextLock logo must face up.
Advertisement
Related Manuals for Digilock Next Lock Range Standard
Summary of Contents for Digilock Next Lock Range Standard
- Page 1 Product Guide Keypad Interface Flex Key Managed - E Function Shared Use Functionality Range locks with a keypad interface are operated by a 4-digit User Code or by an ADA compliant User Key. Management staff uses Manager Flex Key(s) for locker access and audit/inspection. Body Style Range is available in three body styles: Standard, Vertical, and Oval.
-
Page 2: Programming Instructions
Programming Instructions Add Manager Flex Keys At least one Manager Flex Key is required for the lock system. For additional Manager Flex Key(s) contact Digilock Sales. Note the order or serial number (found on the lock’s rear unit). Upon receipt, no additional programming is required. The Collect all remaining Manager Flex Key(s). - Page 3 Product Guide Keypad Interface Flex Key Managed - E Function Shared Use Functionality Set Additional Lock Features LED Usage Indicator Each lock can be programmed to have the LED flash or not flash while the lock is in use. The default setting is ON (red LED flashes while lock is in use).
- Page 4 Product Guide Keypad Interface Flex Key Managed - E Function Shared Use Functionality Operating Instructions In shared use functionality, users enter a self-selected 4-digit User Code or insert any User Key to lock and the same User Code or User Key to unlock.
-
Page 5: Battery Replacement
The lock does not recognize the User Code or User Key. For immediate access, operate with a valid Manager Flex Key. Does not Operate with a Manager Flex Key The lock does not recognize the Manager Flex Key. Contact Digilock Support. For immediate access, operate with another valid Manager Flex Key.