Product Introduction; Product And Model Description - Key Automation EASY Instructions And Warnings For Installation And Use

1 - INTRODUCING THE PRODUCT

1.1 - Product and model description

The EASY is a digital selector pad for controlling automatic doors, for
use instead of or in addition to an SMNPAE manual selector switch.
The EASY allows users to change the door's status and perform con-
trol, setup or diagnostics on operating parameters by means of an
RS485 connection.
When switched on, the EASY sets by default for control of the auto-
matic door's status.
8,2 cm
CODE DESCRIPTION
900EASY Digital selector pad with 128 x 64 pixel display for automatic doors
9,2 cm
To access the set-up and diagnostics menu, the user has to enter a
password (set in the factory as 0000).
The same password can be enabled for automatic door status chan-
ge operations: bidirectional, open, int radar, ext radar, manual, par-
tial and lock; after entering the password, the user has 10 seconds
to make additional changes, after which he will be prompted to enter
the password again.
6 cm
2,8 cm
8 cm
EN
2,5 cm
11