Advertisement
fig 3.
ITEM
PART NO
1
MT680.01
2
MT680.V2-02
3
MT680.V2-03
OPEN VENT
VENT IN TRANSIT
4
MT680.V2-04
5
MT680.V2-05
BEFORE USE
POSITION
6
MT680.V2-06
7
MT680.V2-07
8
MT680.V2-08
9
MT680.V2-09
10
MT680.V2-10
11
MT680.V2-11
12
MT680.V2-12
13
MT680.V2-13
14
MT680.V2-14
15
MT680.V2-15
16
MT680.V2-16
17
MT680.V2-17
18
MT680.V2-18
4. oPeratinG inStructionS
19
MT680.V2-19
20
MT680.V2-20
4.1
Prior to use
21
MT680.V2-21
22
MT680.V2-22
note! Mt680 has a vent valve fig.3a, this is closed for transit only; before use the valve must be lifted or the pump will not
23
MT680.V2-23
function properly.
24
MT680.V2-24
4.1.1 Let the hydraulic pump stand for one hour, to allow the oil to settle, before purging the system.
25
MT680.V2-25
note: Failure to allow sufficient time for the oil to settle could result in air remaining in the oil. Should the pump fail to purge completely
26
MT680.V2-26
at the first attempt, a second purge will be required.
27
MT680.V2-27
4.1.2 Purge the hydraulic system by depressing the release foot pedal (34) and pumping the lift foot pedal (32) fifteen to twenty times.
4.1.3 Test the lift unladen by moving the safety handle (47) to the right and raising the lift to full height.
4.1.4 Move the safety handle to the left (in the depression) and lower the lift by depressing the release foot pedal (34) slowly, to control the
rate of descent.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
4.2
operation (refer to the Parts diagram)
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
WarninG! Ensure that you read, understand and apply the Section 1 Safety Instructions.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including
WarninG! do not overload the Vehicle lift. The maximum load is 680kg.
4.2.1 Position the lift in a suitable location, preferably on a concrete surface.
4.2.2 Turn the locking plate base (27) down to ensure that lift is level and stable on the surface.
4.2.3 Wheel the vehicle up the leading plate and on to the lift platform.
WarninG! The vehicle must be fully supported by the lift platform prior to lifting. do not put the rear wheel of the vehicle
on the leading plate (9) and do not use the leading plate to support the weight of the vehicle when lifting. The leading plate (9)
is only used to assist the operator in wheeling the vehicle on the platform when the lift is at its lowest position.
4.2.4 Secure the vehicle securely to the lift platform. When working on a motorcycle, wheel the bike in to the wheel clamp at the front of the
lift, tighten the clamp to hold the bike in place.
DESCRIPTION
PLATFORM
CRANK HANDLE ASS'Y
WHEEL CLAMP
BAFFLE PLATE
BOLT
BOLT
fig 3.a
M10 FULL HEX NUT BZP
SLIDING PLATE
LEADING PLATE
LOCK PLATE ASS'Y
BOLT
WASHER
BASE ASS'Y
STEEL WHEEL
LIFTING ARM 1
BOLT
LIFTING ARM 2
BOLT
M16 NYLOC NUT S/C
M8 SPRING WASHER BZP
WASHER
M16 SPRING WASHER BZP
M16 FULL HEX NUT BZP
ADJUSTING SCREW
FOOT
SAFETY LATCH
LOCKING PLATE BASE
Original Language Version
MINI TRACTOR / QUAD / MOTORCYCLE LIFT
YANKEE 680KG HYDRAULIC
MT680.V2
MODEL:
ITEM
PART NO
28
MT680.V2-28
29
MT680.V2-29
30
MT680.V2-30
31
MT680.V2-31
32
MT680.V2-32
33
MT680.V2-33
34
MT680.V2-34
35
MT680.V2-35
36
MT680.V2-36
37
MT680.V2-37
Vent ValVe
38
MT680.V2-38
location
42
MT680.V2-42
43
MT680.V2-43
44
MT680.V2-44
45
MT680.V2-45
46
MT680.V2-46
47
MT680.V2-47
48
MT680.V2-48
49
MT680.V2-49
50
MT680.V2-50
51
MT680.V2-51
51A
MT680.V2-51A
52
MT680.V2-52
53
MT680.V2-53
53A
MT680.V2-53A
54
MT680.V2-54
01284 757500
01284 703534
Issue:
1
Issue Date:
171110
DESCRIPTION
CYLINDER
OIL HOSE
COUPLER
PUMP
LIFT FOOT PEDAL
FOOT PEDAL PAD
RELEASE FOOT PEDAL
M6 NYLOC NUT BZP
BOLT
BOLT
WASHER
BOLT
M8 NYLOC NUT BZP
SCREW
M10 NYLOC NUT BZP
M12 FULL HEX NUT BZP
SAFETY HANDLE
SAFETY WIRE
PIN
WASHER
SIDE EXTENSION (RIGHT)
SIDE EXTENSION (LEFT)
EXTENSION PANEL PIPE
RAMP EXTENSION (RIGHT)
RAMP EXTENSION (LEFT)
M12 FULL HEX NUT BZP
postcode.
www.sealey.co.uk
Web
sales@sealey.co.uk
email
MT680.V2
Issue: 2 - 17/11/10
Advertisement
