Advertisement
Quick Links
In the box
NetcamViewer Monitor
Mains power adapter
HDMI Cable, 1 meter
A:
Network connection
B:
HDMI Output
C:
Power supply
START
HERE
Connecting NetcamViewer Monitor
1.
Connect NetcamViewer Monitor to your network (A).
2.
Connect your monitor or TV using the HDMI cable (B). Turn
your screen on and select the correct channel, if necessary.
Note: Before you proceed to step 3 check that the HDMI cable
is properly connected to your screen.
3.
Connect the supplied power supply (C). NetcamViewer
Monitor will start automatically. It will take about 1 minute
before you will see the screen shown above.
4.
Look on your screen for the host name and navigate your
browser to the address indicated to complete the
configuration.
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for NetcamViewer Monitor
- Page 1 Power supply Connect NetcamViewer Monitor to your network (A). Connect your monitor or TV using the HDMI cable (B). Turn your screen on and select the correct channel, if necessary. Note: Before you proceed to step 3 check that the HDMI cable is properly connected to your screen.
- Page 2 You will have the best user experience when using a smartphone or tablet. The menu on the left lets you select from the 4 main pages of NetcamViewer Monitor. If the menu is not shown then press the menu-symbol at the top left of the page.
Need help?
Do you have a question about the Monitor and is the answer not in the manual?
Questions and answers