Warranty - Profab FDD- PRO V Operating And Maintenance Instruction Manual

A. Introduction
We want to thank you for your preference with the purchase of a welding
machine CRT Eurosaldature produced entirely in Italy, a guarantee of reliability,
ease of use, durability, with direct assistance and immediate availability of a wide
range of spare parts.
The machine, for the welding capacitor-discharge, provided of special stud
welding gun, is used in various sectors of manufacturing. Such a plant allows the
application of pins and metal inserts of various types.
This manual has been prepared to convey the necessary skills to enable safe
use of the machine. To this end, each user must read it carefully before starting
up the machine, respecting all indications, obligations and prohibitions.
The capacitive discharge welding machine has been designed and built to be
used in the method of welding capacitor-discharge, in combination with the
welding gun of the contact type, supplied.
Within the limits and conditions set out by the following manual, a different
use is contrary to the purpose for which the machine was built.
B. Warranty
Upon delivery of the welder capacitor discharge, the purchaser must verify the
absence of anomalies if any, to be reported within the statutory time limits.
The guarantee, which lasts TWO years from the day of delivery.
It should however be noted that any tampering of any kind, by the user or by
unauthorized personnel will void the warranty, CE marking and the manufacturer's
declaration, raising the manufacturer from any responsibility for any damage to
persons or property caused by such tampering.
The manufacturer is also relieved from liability arising from the following
cases:
• Incorrect maintenance.
• Lack of maintenance on schedule.
• Improper use of welding capacitor discharge.
This manual
responsibility. CRT EUROSALDATURE Inc. reserves the right to make this manual
at any time and without notice, changes resulting from typographical errors,
inaccuracies in the content, or improvements of programs and equipment.
Any changes will in any case incorporated into new editions of this manual. In
no event CRT EUROSALDATURE Ltd be liable for any direct, indirect, special,
is provided by CRT EUROSALDATURE
3
3
srl without any