Security Settings; Change Supervisor Password; Change User Password - Asus A2D User Manual

Security (Cont')

Security Settings

Supervisor Password: Not Installed/Installed
Display fields show you the status of the security settings.
User Password: Not Installed/Installed
Display fields show you the status of the security settings.

Change Supervisor Password

The system password protects the BIOS settings. When "Enabled", you will be prompted for a pass-
word after you press [F2] to enter BIOS setup.
To set the password:
1. Select "Change ... Password" and press [Enter], type up to 8 letters/numbers and press [Enter]
2. Type the same password again and press [Enter] to confirm.
To clear the password:
Select this item and press [Enter] without entering anything to clear the password.
User Access Level
You can change the access level for this user once a password is set. The configuration options are: [No
Access] [View Only] [Limited] [Full Access]

Change User Password

1. Select "Change ... Password" and press [Enter], type up to 8 letters/numbers and press [Enter]
2. Type the same password again and press [Enter] to confirm.
Boot Sector Virus Protection [Disabled]
This function will stop any attempt to modify hidden bootup files on your hard disk drive. This func-
tion may prevent some applications from installing properly. The configuration options are: [Disabled]
[Enabled]
(continued on next page)
109