Advertisement
Quick Links
Advertisement
Summary of Contents for RSM Miss Sarah
- Page 1 Miss Sarah BUILDING GUIDE...
- Page 2 WING • Your model will not fly well unless the wing is straight with no warps. • Make sure you start with a flat - level building surface or use a Jig. • If you do not have a jig obtain some 1 X 1 balsa and cut it into 8 pieces •...
- Page 3 • Your plans may show a different wing tip. The reason for this is that we have changed the wing tip construction in order to simplify the installation of the adjustable lead out guide. Your kit will have a wing tip package consisting of 1- 3/8" outboard wing tip, 2 - 1/8" inboard wing tip caps and 2 - 1/4" wing tip centers.
-
Page 4: Fin & Rudder
• Measure from the trailing edge of the last rib to the center of the fuselage front to insure that the wing is positioned properly. Measure everything again and if satisfied that the wing is centered and lined up on the thrust line epoxy it to the fuselage. -
Page 5: Parts List
& strongest aircraft possible. Please check that all parts are in your kit. If anything is missing or damaged please contact RSM DISTRIBUTION at the address below. We will send out the part immediately.
Need help?
Do you have a question about the Miss Sarah and is the answer not in the manual?
Questions and answers