Qlima A 68 Operating Manual page 54

G
CAUTION
Do not touch the glass part of the lamp. Oil from fingertips will decrease the effectiveness of the lamp.
Never operate the unit without a filter or with a damaged filter. UV lamp cover must be installed at all
times. The UV light from the UV lamp will result in severe damage to eyes and could cause blindness.
G
UV LAMP NOTICE WARNING
UV Light is harmful to bare skin and eyes and can cause temporary or cleanable loss of vision.
Never look directly at the UV lamp while it is illuminated-doing so could cause loss of
vision!
Before replacing the UV lamp, make sure the A 68 air purifier is turned off and unplugged. Let the lamp cool down
for 5 minutes before replacing it.
Replacing the UV Lamp:
1. Release the inlet grill by pressing on the locking latch.
2. Grasp the left and right frames of the cleanable HEPA-type filter through the indentations on the sides of the
filter enclosure and remove filter.
3. Remove the two bolts used to fix the UV lamp cover and remove the cover out from the unit then unscrew the
old UV lamp from the lamp base of the unit.
4. Install the new UV lamp into the lamp base of the unit.
5. Install the UV lamp cover with the two bolts on the unit.
6. Install the inlet grill on the unit.
4
54 54




4
