Advertisement
Hang the display on the mounting hooks where circled.
Note: It is recommended that capable lift equipment be used to install the displays due to
their weight. Planar provides lifting eyes (sold separately) for use with capable equipment
(see "Using the Lifting Eyes" in the Planar UltraRes X Series User Manual). If mechanical
equipment is unavailable or impractical, Planar supplies lifting straps for use with lifting
displays.
Caution: Displays may be very heavy, make sure enough resources are available to lift
displays into place on the mount structure.
If the panel interferes with the locking tabs or the locking tabs are unable to engage, adjust
the vertical position of the service mounts to accommodate. Remove the center screw to
make this adjustment.
Once the display is able to lay flat and the locking tabs engage with the bottom display
mount brackets, the locking tabs may be re-tightened to the service mounts to keep the
panel from being pulled out.
Planar Profile Mounting System Installation Guide
008-0217-00A
11
Page | 11
Advertisement
