Page 6
High Performance Solar PV output. y All TSC modules are equipped with connecting cables and locking connectors. Modules have been designed to be easily connected. The locking connectors are not to be disconnected under load. The proper procedure to disconnect the module locking connectors is as follows: Turn off the inverter(s), shut off the module DC disconnect(s) and then disconnect the locking connectors using an approved tool set.
No license is granted by implication or otherwise under any patent or patent rights. y The information in this Manual is based on TSC‘s knowledge and experience and is believed to be reliable; but such information, including the product specifications (without limitations) and suggestions, do not constitute a warranty, expressed or implied.
Need help?
Do you have a question about the PowerXT R Series and is the answer not in the manual?
Questions and answers