Astar MSC-2200 Quick Start

PLAYING THE RADIO

MCS-2200 DVD MINI COMPO SYSTEM
PLAY STOP DVD TUNER MEMO
REV AUX1 AUX2 DOWN
PREV NEXT PRE/TUN
POWER
Positioning
1.Press TUNER button to select desired wave
band (AM or FM).
2.Press UP or DOWN button to find a station.
The frequency will change with each press.
When a station's signal is received, it will
14
appear in the display.
3.To lock on to a station quickly, hold the UP
or DOWN button for two seconds. The unit
will start automatic tuning. When a station
is found, automatic tuning stops.
4. To add a station to memory, press the MEMO
button. The memory storage number will
blink for four seconds in the display. Press
MEMO again to store the station.
Memory number
Wave band Station frequency
5. To reduce noise when an FM-stereo program
has been received, press the FM button. The
word STEREO will disappear from the display.
The program is now heard in monographic
form, reducing the noise. To resume stereo
play, press the FM button again.
OPEN/CLOSE
MENU
AUTO
FM MODE
UP
OPEN/CLOSE
SETUP
PBC
MEMO
PHONE

Automatic Tuning

This unit will store up to 50 individual AM or
50 individual FM radio stations in its memory.
1.Press the AUTO button. The word AUTO
will appear in the display and the automatic
tuning mode is activated.
2.Stations will be stored in ascending order
until 50 stations of that particular wave band
have been saved. When a station is stored, the
memory storage number, as well as the station's
frequency, will flash for four seconds in the
display.
3.When the total number of stations reaches
50, in a particular wave's (AM or FM) memory,
no further station in that wave band will be saved.

To Play Preset Stations

1.Press the TUNER button to select the
desired wave band.
2.Press the PRE/TUN button.
3.Press any of the numbere buttons to
select the desired station's memory number.
For example, to play the station at memory
#5, simply press the 5 button; for memory
#17, press the 1 button followed by the 7
button.
4.Stations in the memory function may also
be accessed by pressing the UP or DOWN
button.
Once the unit is connected to a television
MUTE
set and any other accessory equipment, you
DVD TUNER AUX1 AUX2
are ready to enjoy the excitement of DVD videos
N/P SUBTITLE LANGUAGE ANGLE
or your favorite CDs and MP3 files.
To play a DVD video disc:
Turn on the TV and select the A/V mode. If
+10 TIME
PROG L/R
the set features an SCART connection, be sure
TITLE
DISPLAY SLOW VOLUME
the SCART mode is selected from the TV menu.
PRE/TUN
Turn on amplifier, if connected. Select AC-3 or
P-SCAN
DVD mode.
ENTER
REPEAT
STEP ZOOM RESUME
To play an audio disc:
PLAY
STOP PAUSE A-B
Turn on the audio system and choose the
AUTO DOWN UP
input source that is connected to the DVD player.
Set the SPDIF OUTPUT to SPDIF OFF from the
SETUP MENU display if you don't have the
proper equipment for Dolby Digital surround
sound.
1. Press the POWER key on front panel.
DISC LOADING appears on screen.
POWER
If there is no disc, NO DISC shown on screen:
2. Press the OPEN/CLOSE key. The disc
tray will open.
OPEN/CLOSE
FRONT PANEL
OPEN/CLOSE
REMOTE CONTROL
3. Place the disc on the disc tray. Be sure
play side is face down on the tray.
4. Press OPEN/CLOSE key to close tray.
The disc tray will close. The disc type will
appear in the upper-left-hand corner of the
screen.
BASIC DVD
OPERATION
Once it has read the disc, the unit automati-
cally will begin playback. When playing a DVD,
the DVD title or menu will appear. CD tracks are
played in sequence.
Note:
It is possible to damage a disc if it is not
placed correctly on the guides in the disc tray.
This may also cause
malfunction. Do not force or place anything
other than a 5 DVD or CD onto the disc tray.
Never move the DVD player during playback ,
as this may cause damage to the disc as well as
the player. To open and close the disc tray, only
use the OPEN/CLOSE key found on both the
remote control and on the unit's front panel.
REMOTE CONTROL
FRONT PANEL
LOADING
Press STOP key:
REMOTE CONTROL
FRONT PANEL
5. PREV/NEXT playback
No Disc
Press
track. To resume normal playback, press PLAY key.
Press PREV key:
REMOTE CONTROL
OPEN
Press NEXT key:
REMOTE CONTROL

6.Fast Forward/Reverse Playback

The unit features both fast forward and fast
reverse playback. Either mode will speed up:
2x,4x,8x,16x,32x.
the DVD player to
"
PLAY
PLAY
PLAY
15
STOP
STOP
STOP
key or key , play previous or next
PREV
DOWN
NEXT
UP