Advertisement
• Fit the tabs on the light and sound
box into the slots in the clip.
• Fasten the fasteners on the
bunny closed.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of
batteries: alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during
long periods of non-use. Always
remove exhausted batteries from
the product. Battery leakage and
corrosion can damage the product.
• Never short circuit the battery
terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the
"Battery Replacement" instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged
under adult supervision.
• Rechargeable batteries are to be removed from the product before they
are charged.
• If you use a battery charger, it should be examined regularly for damage
to the cord, plug, enclosure and other parts. Do not use a damaged battery
charger until it has been properly repaired.
Care
• Unfasten the fasteners on the back of the bunny and remove the light and
sound box.
• Place the bunny in a pillowcase and machine wash cold with a mild detergent.
Do not use bleach. Tumble dry the bunny on low heat.
• Fit the light and sound box into the clip in the bunny. Fasten the fasteners on
the bunny closed.
• Do not immerse the light and sound box.
• If sound or lights from/on this product become faint, or if there is no sound or
lights, remove the batteries and dispose of them properly. Replace the batteries
with two, size "AA" (LR6) alkaline batteries.
Clip
3
Light and
Sound Box
Tab
Slots
Advertisement
