Advertisement
4.2.
BOTTOM BEARING RACE INSERTION
4.2.1.
Position bottom bearing race in headstock and select appropriate size die, one which is slightly smaller than the diameter of the
bearing race.
4.2.2.
Slide the pressure plate onto the bearing setting bar, allowing it to click into one of it's positions (fig.3.4). Continue to wind the winding
handle onto the bar so that the bearing race is pushed into the headstock (fig.3.5). When in place release the pressure plate and
remove the assembly from the headstock.
4.2.3.
To ensure that both bearing races are fully driven home, place the die onto the die handle, position it over the bearing race and using a
soft faced hammer, drive the bearing race home. Return all parts to the case, and store in a safe, dry, childproof location.
fig.3
5. PARTS
SMC3.01
STEP DIE 32mm
SMC3.02
STEP DIE 36mm
SMC3.03
STEP DIE 38mm
SMC3.04-6
STEP DIE 42mm
SMC3.07
STEP DIE 46mm
SMC.08
DRIVE HANDLE
SMC.09
SLIDING PRESS PLATE
SMC.10
HEX SHAFT
Parts support is available for these products. Please email sales@sealey.co.uk or telephone 01284 757500
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
1
2
4
SMC3.11
SMC3.12
SMC3.13
01284 703534
Original Language Version
3
5
SLIDING LEVER
HANDLE
BLOW MOULD CASE
sales@sealey.co.uk
www.sealey.co.uk
SMC3
Issue 1
18/10/19
Advertisement
