Table of Contents
Advertisement
SETTING THE PUMPING-OUT TIME
The pumping-out time can suitably be extended if you are using a long drain hose, max. 3 metres, or
if the machine for any other reason has difficulty in pumping out the waste water in time. Proceed as
follows:
1. PRESS NORMAL WASH* (WITHIN 15 SECONDS)
2. PRESS NORMAL WASH ONCE FOR 20 SECONDS PUMPING-OUT TIME
OR
2. PRESS LIGHT WASH ONCE FOR 25 SECONDS PUMPING-OUT TIME (NORMAL) 25
2. PRESS QUICK WASH ONCE FOR 35 SECONDS PUMPING-OUT TIME
2. PRESS RINSING ONCE FOR 45 SECONDS PUMPING-OUT TIME
2. PRESS PLATE HEATING ONCE FOR 85 SECONDS PUMPING-OUT TIME
* THE LATEST SELECTED SETTING WILL BE SHOWN.
SETTING THE WATER HARDNESS
If you have a dishwasher that is equipped with a water softener you may wish to alter its setting
depending on hardness of the water in your area. The softener is set at 10-14°dH on delivery.
1. PRESS PLATE HEATING FIVE TIMES* (WITHIN 15 SECONDS)
2. PRESS STRONG WASH ONCE FOR WATER HARDNESS 0-9**
OR
2. PRESS NORMAL WASH ONCE FOR WATER HARDNESS 10-14**
2. PRESS LIGHT WASH ONCE FOR WATER HARDNESS 15-19**
2. PRESS QUICK WASH ONCE FOR WATER HARDNESS 20-24**
2. PRESS RINSING ONCE FOR WATER HARDNESS 25-34**
2. PRESS PLATE HEATING ONCE FOR WATER HARDNESS 35-49**
2. PRESS DELAYED START ONCE FOR WATER HARDNESS 50-70**
* The latest selected setting will be shown.
** °dH
26
Display
Lamps
20
35
45
85
1
2
3
4
5
6
7
Advertisement
Table of Contents
