Page 1
Installation, Operating and Maintenance Instructions for Alarm Switchgear AS1-M 2331.827/03-EN Installation, Operating, and Maintenance Manual Alarm Switchgear AS1-M These installation, operating and maintenance manual must be handed to the fitter/installer/operator/service personnel of our products together with all other relevant documentation and user information!
(refer to Section 2 of these instructions: Excessive Discharging). A switch on the underside of the housing can be used to turn the AS1-M alarm switchgear on and off. Pressing the switch in turns the device off; releasing the switch turns the device on.
Page 4
M 1 (K) alarm contactor AS1-M alarm switchgear All technical parameters of the AS1-M switchgear are specified in this brochure and must be observed and followed, without exception, at all times. Applications outside the envelope of the key technical data specified are prohibited.
The AS1-M alarm switchgear must not be installed in rooms that can become flooded. Exclusion of the Effects of Moisture and Humidity on the AS1-M Alarm Switchgear The AS1-M alarm switchgear must not be used in areas in which the device could be subjected to moisture and humidity.
If both of these checks are successful (i.e. no problems are detected), the device may then be commissioned. 7. Maintenance The AS1-M alarm switchgear and the M 1 (K) alarm contactor connected to it require no maintenance. The rechargeable battery of the AS1-M alarm switchgear must be replaced by qualified staff every 7 years at the latest, however.
Installation, Operating and Maintenance Instructions for Alarm Switchgear AS1-M 2331.827/03-EN If the alarm switchgear is used as a safety link in a system, the installation may need to be inspected and checked at designated intervals approved by the local supervisory authority.
Page 8
Klostergartenstr. 11 67466 Lambrecht declares that the following product, which is new and designed for use in dry rooms: Alarm Switchgear AS1-M complies with: the Directives 2006/95/EC (low voltage) and 2004/108/EC (EMC) the standard DIN EN 60730-1 (VDE 0631-1) : 2012-10.