Citrix X1BTLE Quick Start Manual page 2

Instructions
1. Install the latest version of Citrix Receiver.
2. Enable Bluetooth from iPhone or iPad. Enable the X1
Mouse by On switch on bottom.
3. Start Receiver and Enable X1 Mouse from Settings options
from top right Receiver menu.
4. Press Connect button on mouse bottom.
5. iOS pop-up will prompt to pair the mouse, press OK.
6. Once paired you can see mouse cursor, please note that
mouse click will work only inside the HDX session.
7. In case of any issues (i.e. if not seeing mouse cursor)
a. Kill the Receiver app by swiping up.
b. Go to Setting->Bluetooth (locate Citrix X1 Mouse),
press i, then Forget This Device.
c. Follow the pairing process again as in #2-4.
Notes:
• The Receiver with an iPhone can also support external
monitors via VGA/HDMI cable.
• The Citrix X1 Mouse will also operate as a standard Blue-
tooth 4.0 Mouse with a PC or Android. (Re-pairing
is required)
• The Citrix X1 Mouse will only work with Receiver or other
supported Citrix apps, not standard iOS apps.
• Citrix X1 Mouse works with iPad 3 or later and iPhone 4s
or later.
• Do not pair the Mouse to iPad/iPhone via iOS settings.
• For more information see Citrix.com/Mouse
FDA: The Citrix X1 Mouse is a Class 1 laser product in accordance with IEC
60825-1 A1 A2 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007. Caution: Modification of this
device may result in hazardous radiation exposure. For your safety, have this
equipment serviced only by an Authorized Service Provider. A Class 1 laser
is safe under reasonably foreseeable conditions per the requirements in IEC
60825-1 AND 21 CFR 1040. However, it is recommended that you do not direct
the laser beam at anyone's eyes.
FCC ID: 2AEDSX1BTLE. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Radio and Television Interference
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Important: Any changes or modifications not expressly approved by Citrix
Systems Inc. could void the user's authority to operate this equipment.
Responsible party information Citrix Systems Inc. 4988 Great America Pkwy,
Santa Clara, CA, 95054
This product complies with the requirements set out in the Council (European
Parliament) Directive on the Approximation of the Laws of the Member
States relating to Electromagnetic Compatibility of Radio and Telecom device
(1999/5/EC) and restriction of the use of certain hazardous substances in
electrical and electronic equipment 2011/65/EU.
IC: 20012-X1BTLE. This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions: 1.This
device may not cause harmful interference; 2.This device must accept any
interference received, including interference that may cause undesired
operation of the device.
Cet appareil est conforme à Industrie Canada une licence standard RSS
exonérés (s). Son fonctionnement est soumis auxdeux conditions suivantes: 1.
Cet appareil ne doit pas provoquer d'interférences; 2. Cet appareil doit accepter
toute interférence reçue, y compris les interférences pouvant provoquer un
fonctionnementindésirable de l'appareil.
Radiation Exposure Statement: The product complies with the US/Canada
portable RF exposure limit set forth for an uncontrolled environment and
is safe for intended operation as described in this manual. Further RF
exposure reduction can be achieved if the product can be kept as far as
possible from the user body or set the device to lower output power if such
function is available.
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables
RF pour les Etats-Unis et le Canada établies pour un environnement non
contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel.
La réduction aux expositions RF peut être augmentée si l'appareil peut être
conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est
réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.
IFT: RCPCIX115-0584. "La operación de este equipo está sujeta a las siguientes
dos condiciones:1.es posible que este equipo o dispositivo no cause
interferencia perjudicial y; 2. este equipo o dispositivo debe aceptar cualquier.
interferencia, incluyendo la que pueda causar su operación no deseada"