Electrical Connection PCF15 & PCF40 is supplied with a molded 13 Amp plug which needs a suitable socket. PCF50 requires dedicated 16 Amp supply. This cabinet should not be used outside and should be used in a dry environment.
Shelves / Pans / Slides Fit the shelf / pan slides in the correct position to suit the user. Gastronorm pans are not supplied as standard. Castors / Adjustable Legs / Levelling Feet Lock the two front castors once the cabinet is in its final position by pressing down the metal bar with your foot.
Operation Modes Precision Blast Chiller / Freezers have the following operation modes: Soft Chill – Blast Chill Food to 3ºC - For Delicate, Less Dense Food Products Hard Chill – Blast Chill Food to 3ºC - For Thicker Food Products & Sauces Freeze –...
Page 6
During a Cycle Once a cycle has started, the screen shows remaining time on a time cycle or food probe on a probe controlled cycle. Press to edit a cycle midstream and modify cycle duration time or food probe termination temperature. Press for information mid cycle: Press...
Page 7
End of Cycle Buzzer Sounds & Completed Screen Shows Indicating Cycle Is Complete. Touch Screen To Clear. Appropriate Chill or Freeze Storage Mode Starts Automatically Once Chill, Freeze or Thaw Cycle Terminates. Storage Mode Will Continue Indefinitely Until Cancelled. - 7 -...
Settings Screen Press to enter settings. Please note, icons turn dark blue in settings mode. Changing Default Cycle Settings: Press any button to adjust desired default cycle settings Press any setting to change parameter Changing System Settings: Press to change system settings Press any setting to change parameter.
Alarms: Press to see details of any recent errors Engineer Settings: Press to access engineering mode to modify any setting. Please note this area is password protected for engineer’s use only. Contact factory for password. Maintenance The Blast Chiller / Freezer is fully automatic and, apart from cleaning needs very little maintenance.
Condenser Cleaning All the heat removed from the Blast Chiller / Freezer is discharged into the room via the condenser which is similar to a car radiator. This must be kept clean so that the air can pass through it to remove the heat, if it becomes choked with dust the unit will overheat and this can lead to a burnt-out compressor.