Related Manuals for Adexa CIC2800
Summary of Contents for Adexa CIC2800
- Page 1 User's Manual TECHNICAL SPECIFICATIONS Product Name: Double Induction Cooker Model: CIC2800 Voltage: AC 220-240V, 50Hz Power: 2800W max. Thank you for purchasing this product, please read the manual carefully before using and keep it for future reference.
-
Page 2: Control Panel
CONTROL PANEL ※ Not actual product, just for reference HOW TO USE 1.Switch on Plug in the socket, the indicator comes on and has entered an idle state. Touch [On/Off] button the digital display will blinding, the buzzer will warning with “DI”,touch [On/Off] button which will cancel all selected function and bring it back to idle state. - Page 3 6.According to the cooking requirement, there have 10 levels to adjust the temperature(60℃ to 240℃) by touch “+/-”. The max temperature is 240℃, the min temperature is 60℃. At the max temperature, the unit has no response by touch the “+” key, but at the min temperature, the unit will shutdown by touch the “-“key.
- Page 4 ⚫ You can preset a cooking time, change or check the current status of the remaining cooking time with the "TIMER” button. You can set the cooking time from 5 minute (0:05) up to 3 hours (3:00, equivalent to 180 minutes). ⚫...
- Page 5 ※Do not immerse the cooker in water and do not use gasoline or benzene etc detergent to clean. You should use soft damp cloth to wipe it. ※Please do not rub the surface by the bottom of pots to avoid damage of the plate. ※Thoroughly clean the cooker before storing, cover it with plastic bag and keep it in dry place.
- Page 6 CAUTION Use specified socket only (Current>12A). Do not use water to wash the cooker directly, and use damp cloth to clean it. To avoid danger, please do not heat the empty pan on the plate. To avoid electric shock, the air inlet and outlet should be without any foreign objects such as iron wire.
-
Page 7: Malfunction Code
Malfunction Code If there is something wrong with the induction cooker, please check it as following before sending to repair. Malfunction Disposal The pot used is not suitable The temperature of IGBT is over high or the IGBT is open/short circuit. The temperature under glass is over than 180℃,or the temperature sensor is in open/short circuit.