red roo HLS Safety Precautions And Operating Instructions

3)
ALWAYS wear protective clothing when operating
3) Starting The Engine:
the rotary hoe. This includes, but is not limited to;

OPERATING INSTRUCTIONS FOR HLS USER

Safety Instructions For Rh918 Users
OPERATION
OPERATION
safety glasses, loose fitting gloves, steel capped
a. Move the fuel valve
Familiarise yourself with the hydraulic log splitter and its
boots and hearing protection. NEVER wear loose
Operation Of Gt622
lever to ON
controls.
OPERATION OF GT622 fitting clothing or jewellery when operating the
USE COMMON SENSE
1) Remove the garden tiller
1) Remove the garden tiller
position.
Wear safety glasses, or helmet visor combination, loose rotary hoe. Keep all clothing away from moving
from its trailer/carrier. Use caution.
from its trailer/carrier. Use caution.
fitting gloves, hearing protection and safety work boots. parts. Items could become caught in the machine,
AND PLENTY OF IT
aution. b. To start a cold
1) Remove the garden tiller
resulting in injury.
PPE (Personal Protection
engine, move the
2) Familiarize yourself with the machine and its 1) Remove the garden tiller
2) Familiarize yourself with the machine and its
from its trailer/carrier/ute. Use caution.
Equipment) is mandatory 4)
choke lever or choke ALWAYS use the rotary
from its trailer/carrier/ute. Use caution.
controls.
machine and its
1)
controls. DO NOT allow any person operate the
before operating this machine.
rod (applicable hoe in a well lighted area.
2) Familiarize yourself with the machine and its
rotary hoe without first reading and
3) Ensure the safety clutch control lever is in the
types) to the
2) Familiarize yourself with the machine and its 3) Ensure the safety clutch control lever is in the
5) ALWAYS operate the rotary
ALWAYS make certain that all control levers are in the
controls.
understanding the safety instructions and
CLOSED disengaged position. The safety clutch
controls. disengaged position. The safety clutch
disengage position prior to starting the engine. hoe on level ground only.
operating instructions.
position.
trol lever is in the
control lever is located on the left handle bar.
3) Adjust wheels if required, using the handle wheel Police the area before rotary
control lever is located on the left handle bar.
Disconnect the retaining pin from the headstock and lower KNOW THE CONTROLS AND HOW TO STOP
3) Adjust wheels if required, using the handle wheel
To restart a
The disengaged position of the lever is down. hoeing. Remove any foreign objects in the digging
adjustment lever.
e safety clutch The disengaged position of the lever is down.
the lifting table onto the lifting frame.
THE ROTARY HOE QUICKLY IN AN EMERGENCY.
warm engine, adjustment lever. area - bricks, rocks, wire and sticks. Locate and mark
DO NOT allow by-standers near the hydraulic
e left handle bar. 4) Remove the shaft locking pin located behind
leave the choke lever or choke rod in the OPEN position. any sprinkler heads, water pipes, gas lines,
4) Remove the shaft locking pin located behind Adjust depth shoe if required, using the depth
2) 4)
NEVER allow children to operate the rotary hoe.
logsplitter while in operation. OPERATING THIS
4) Adjust depth shoe if required, using the depth
the wheel axle. Store pin in hole provided on electrical and telephone cables or any other hazard
control adjustment lever. the wheel axle. Store pin in hole provided on
he lever is down.
c. Move the
3) MACHINE IS A SINGLE PERSON OPERATION.
ALWAYS wear protective clothing when operating
either below or above ground.
control adjustment lever.
left hand side of handle bar.
throttle lever left hand side of handle bar.
It is the responsibility of the operator to keep
the rotary hoe. This includes, but is not limited to;
5) Ensure the tyne engagement control lever is in
away from the
6) DO NOT allow other persons near the
n located behind
5) Ensure the tyne engagement control lever is in
bystanders and animals a minimum of 6 metres (18 feet) 5) The wheel axle will now pivot. Lift up on the
safety glasses, loose fitting gloves, steel capped
5) The wheel axle will now pivot. Lift up on the the neutral position. The tyne engagement
MIN position, rotary hoe. It is up to the operator to keep
away from the hydraulic log splitter while in operation.
the neutral position. The tyne engagement
boots and hearing protection. NEVER wear loose handle to allow wheel axle to pivot. For
hole provided on
control lever is located handle to allow wheel axle to pivot. For on the left hand side of the
about 1/3 of the bystanders and animals a minimum of 6
fitting clothing or jewellery when operating the control lever is located on the left hand side of the
Transport, keep the wheel axle forward. When
Open fuel shut off valve, if engine is equipped.
way toward the machine below handle bar. The neutral position transport, keep the wheel axle forward. When
metres (20') away from the machine while in
rotary hoe. Keep all clothing away from moving
machine below handle bar. The neutral position
Move choke control to CHOKE or START position. cultivating, keep the wheel axle rearward for
MAX position. operation.
cultivating, keep the wheel axle rearward for
of the lever is achieved by simply releasing the
parts. Items could become caught in the machine,
Note: Choke must be fully closed. Move throttle
added stability and control. of the lever is achieved by simply releasing the
added stability and control.
tyne engagement control lever.
7)
ot. Lift up on the NEVER operate the rotary hoe when fatigued.
control to RUN or FAST position. If engine is equipped d. resulting in injury. Turning the engine switch
DO NOT transport the tiller with the wheel tyne engagement control lever.
DO NOT transport the tiller with the wheel
ALWAYS BE ALERT! If you get tired while
to the ON position.
with rocker style stop switch, push RUN or I (I = Ignition)
le to pivot. For
4)
ALWAYS use the rotary
axle in the rear position.
6) operating the rotary hoe, take a break. If you have Open fuel shut-off valve. Set choke
axle in the rear position.
before starting. Rewind Starter: Grasp rope handle and
6) hoe in a well lighted area. Open fuel shut-off valve. Set choke
any type of physical or mental condition that may
le forward. When
control to Choke or Start position.
RECOIL STARTER
pull slowly until resistance is felt to prevent kickback. Then 6) Adjust depth shoe (if equipped) by removing
6) Adjust depth shoe (if equipped) by removing
be aggravated by strenuous work, consult with control to Choke or Start position.
5) ALWAYS operate the rotary
Set throttle control to Run or Fast Pull the starter grip lightly
axle rearward for pull cord rapidly to overcome
shaft locking collar and sliding depth shoe to
shaft locking collar and sliding depth shoe to your physician before you operate this equipment.
Set throttle control to Run or Fast
until you feel resistance,
position. Set engine hoe on level ground only.
compression and start engine.
desired position. Replace shaft locking collar.
NEVER operate the rotary hoe under the influence
desired position. Replace shaft locking collar.
position. Set engine
then pull briskly.
Police the area before rotary
Repeat if necessary with choke stop switch to On or
of medication, alcohol or drugs.
stop switch to On or Return the starter
r with the wheel 7) Open fuel shut-off valve. Set choke
off and throttle control in FAST hoeing. Remove any foreign objects in the digging
Run position. Pull
7) Open fuel shut-off valve. Set choke
ALWAYS KEEP YOUR HANDS,
grip gently.
Run position. Pull
position. Operate engine in fast
area - bricks, rocks, wire and sticks. Locate and mark control to Choke or Start position.
starter cord rapidly.
control to Choke or Start position.
FEET AND BODY AWAY FROM
position. starter cord rapidly.
any sprinkler heads, water pipes, gas lines,
Set throttle control to Run or Fast
4)
Repeat (if necessary) Set throttle control to Run or Fast
THE DIGGING ZONE WHILE
electrical and telephone cables or any other hazard
Repeat (if necessary)
position. Set engine
Place or roll log / wood onto lifting table (DO NOT EXCEED
with choke off. position. Set engine
ped) by removing ENGINE IS RUNNING.
a.
Start and warm up engine.
either below or above ground.
with choke off.
250KGS/550LBS). stop switch to On or
stop switch to On or
ng depth shoe to
b. Put Wheel Drive Control Lever in neutral.
Run position. Pull
7) When in position to begin garden tilling,
6)
Lift the log / wood and roll the log / wood between the head Run position. Pull DO NOT allow other persons near the
7) When in position to begin garden tilling,
c. One wheel hub may be disengaged (free wheeling) starter cord rapidly.
aft locking collar.
pull up on the tyne engagement control lever.
stock and the splitting head. NEVER have your hands or rotary hoe. It is up to the operator to keep
starter cord rapidly.
for easier steering before driving machine to work pull up on the tyne engagement control lever.
Repeat (if necessary)
fingers between the log / wood and the splitting head or The tynes will begin to turn. Release the tyne
bystanders and animals a minimum of 6
Repeat (if necessary)
loccation. (See Wheel Hub Feature)
The tynes will begin to turn. Release the tyne
head stock. with choke off.
alve. Set choke engagement control lever to stop the tynes turning.
metres (20') away from the machine while in with choke off.
engagement control lever to stop the tynes turning.
d. Squeeze the safety Clutch Lever/Operator Presence
Tyne speed is governed by engine throttle setting.
operation.
NEVER place your hands or fingers
Start position.
8) When in position to begin garden tilling,
Control and change the Wheel Direction Control to
8) When in position to begin garden tilling, Tyne speed is governed by engine throttle setting.
between the end of the log / wood and the
7)
NEVER operate the rotary hoe when fatigued. engage the safety clutch control lever. The
desired speed and direction.
o Run or Fast
engage the safety clutch control lever. The
headstock. (See inside reference photo).
8) Do not hurry the job. Proceed slowly and allow
ALWAYS BE ALERT! If you get tired while
tynes will begin rotating. Wheel axle must be in
e. Adjust the wheel speed and navigate the trencher to the
tynes will begin rotating. Wheel axle must be in
8) Do not hurry the job. Proceed slowly and allow
the machine time to do the job. When ground
NEVER place your hands or fingers between the end of the
operating the rotary hoe, take a break. If you have
starting position. The trencher is designed to dig toward
the rear position while tilling. Release the
the rear position while tilling. Release the
the machine time to do the job. When ground
log / wood and the splitting head. is extremely hard, reduce engine speed. Consider
any type of physical or mental condition that may the operator (with the Wheel drive Control Lever in
safety clutch control lever to stop the tynes
safety clutch control lever to stop the tynes
is extremely hard, reduce engine speed. Consider
reverse). With this in mind, position the machine to
be aggravated by strenuous work, consult with watering the surface and reducing engine speed.
NEVER position the log by placing your hands or fingers at
rotating. Tyne speed is governed by engine
rotating. Tyne speed is governed by engine
watering the surface and reducing engine speed.
start the trench. Note: When initially engagaing the
your physician before you operate this equipment.
Adjust wheels and depth shoe accordingly while
the ends of the log / wood.
throttle setting.
throttle setting.
rotating chain into the ground, be aware that in the hard or
Adjust wheels and depth shoe accordingly while
NEVER operate the rotary hoe under the influence
tilling
Position the log by placing a hand on the top of the log /
rocky ground the rotating trencher chain may
tilling
of medication, alcohol or drugs.
WARNING! – KEEP HANDS AND
wood as close to the centre of the log / wood as possible.
aggressively dig in and lurch forward. For this reason WARNING! – KEEP HANDS AND
NEVER have your hands or fingers close to the headstock FEET CLEAR OF TYNES AT ALL
make sure that theres is sufficient clearance from ALWAYS KEEP YOUR HANDS,
FEET CLEAR OF TYNES AT ALL
WARNING! – KEEP HANDS AND
or splitting head while the machine is in operation.
structures, objects or people in front of the machine. TIMES!
FEET AND BODY AWAY FROM WARNING! – KEEP HANDS AND
TIMES!
FEET CLEAR OF TYNES AT ALL
REMEMBER OPERATING THIS MACHINE IS A SINGLE
n garden tilling, THE DIGGING ZONE WHILE FEET CLEAR OF TYNES AT ALL
TIMES!
PERSON OPERATION. Keep all bystanders a minimum of
ENGINE IS RUNNING. TIMES!
ontrol lever. The
6 metres (18 feet) away.
engine is running.
5) Trenching Procedure:
12) DO NOT overspeed the engine or alter the governor
9) Do not hurry the job. Proceed slowly and allow ALWAYS position the log / wood to split with the grain of the
9) Do not hurry the job. Proceed slowly and allow
settings. Excessive speed is dangerous and will
9) Do not hurry the job. Proceed slowly and allow
Make sure that there is sufficient clearance from
log / wood.
the machine time to do the job. When ground
shorten engine life. the machine time to do the job. When ground
structures, objects or people in front of the machine the machine time to do the job. When ground
When splitting wood always operate the hydraulic logsplitter 13)
is extremely hard, reduce engine speed.
a. Put Wheel Drive Lever in neutral.
is extremely hard, reduce engine speed. 8) is extremely hard, reduce engine speed.
ALWAYS make certain the Tyne Control Lever is
in front of the axle on the hydraulic valve side of the main
b.
Be sure both hubs are engaged (turn hub lock handle
set at neutral while loading and unloading the
beam only. Use caution whilst standing in this position as
clockwise). (See Free Wheel Hub Feature)
rotary hoe, or moving to and away from working area.
WARNING! – IN CASE OF DIFFICULTY, certain logs / wood can spring back under tension, and exit
c. Have engine at full throttle (forward).
from the hydraulic logsplitter with force. 9)
NEVER run the machine in reverse while the tynes
DISENGAGE THE SAFETY CLUTCH d. Hold Digging Chain Control Lever in On position.
14)
are rotating. Always move the tyne control lever to
Engage the splitting head control lever until it comes in e. Squeeze the safety Clutch Lever/Operator Presence Control.
CONTROL LEVER. ALL TILLING ACTION
"OFF" before reversing the wheels.
contact with the log / wood. Slowly ease the splitting head
f. Slowly lower the digging boom until the desired trench
10)
STOPS. Press the engine "STOP" button into the log / wood. Do not try to force the split. Once the
depth is achieved using the Digging Boom Control Lever.
log / wood is secured between the splitting head and head
g. Put Wheel Drive Control Lever in reverse. Start at low speed.
10) Stop Engine: Release the safety clutch control
located on the engine. 15)
10) Stop Engine: Release the safety clutch control
9) Stop Engine: Release the tyne engagement
stock remove your hand from the top centre of the log / wood
h. Adjust the wheel speed until a workable speed is reached
lever. Move throttle to Slow position. Set engine
9) Stop Engine: Release the tyne engagement
lever. Move throttle to Slow position. Set engine
control lever. Move throttle to Slow position.
and proceed to split. NEVER PLACE YOUR HANDS OR
Use a very slow speed for trenching and adjust for soil
stop switch to Stop or Off position. DO NOT move
control lever. Move throttle to Slow position.
stop switch to Stop or Off position. DO NOT move
FINGERS AT THE END OF THE LOG / WOOD.
11) DO NOT leave the machine unattended while the Set engine stop switch to Stop or Off position.
conditions as necessary. If objects such as rocks or roots
10) Stop Engine: Release the safety clutch control
choke control to Choke
Set engine stop switch to Stop or Off position.
choke control to Choke
jam in the chain, release the Safety Clutch Lever/Operator
DO NOT move choke engine is running.
SPLIT WOOD IN THE DIRECTION OF THE GRAIN ONLY.
or Start position to stop
lever. Move throttle to Slow position. Set engine
DO NOT move choke
Presence Control, then reverse the chain to dislodge the or Start position to stop
control to Choke or Start
12) DO NOT overspeed the engine or alter the governor
Log / Wood to be split should be cut as squarely as possible.
engine. Backfire or
debris. If necessary move the trencher forward a few control to Choke or Start
engine. Backfire or
stop switch to Stop or Off position. DO NOT move
position to stop engine.
settings. Excessive speed is dangerous and will
NEVER attempt to load the hydraulic log splitter when the
inches and trench the area again. engine damage may
position to stop engine.
engine damage may
Backfire or engine
shorten engine life.
choke control to Choke
ram is in motion.
occur.
Backfire or engine
occur.
13)
damage may occur.
or Start position to stop NEVER straddle or climb over the hydraulic log
damage may occur.
After Use splitter while in use.
AFTER USE
engine. Backfire or
AFTER USE
AFTER USE
engine damage may
1)
1)
occur.
1)
14)
1)
splitting head clear all debris and repeat the procedure
2) Allow machine to cool down.
2) Allow machine to cool down.
6) STOPPING THE ENGINE:
STOP ENGINE: Do not move choke control to Choke
AFTER USE
2) Allow machine to cool down.
3) Wash mud and dirt off of the garden tiller. Shut off switch on
position to stop engine. Backfire or engine damage may
3) Wash mud and dirt off of the garden tiller.
2) Allow machine to cool down.
console should be
occur. Move throttle control to SLOW Ensure no water enters the carburettor.
3) Wash mud and dirt off of the garden tiller.
15) Ensure no water enters the carburettor.
used, not shut off
position, then push rocker switch to O 3) Wash mud and dirt off of the garden tiller.
1) Turn fuel shut off valve to the "OFF" Ensure no water enters the carburettor.
4) Remove any weeds, wire, rope or other
switch on engine.
4) Remove any weeds, wire, rope or other
(STOP), or turn key to off if equipped.
Ensure no water enters the carburettor.
position. material that may have wrapped around the
a. Move the throttle lever
4) Remove any weeds, wire, rope or other material that may have wrapped around the
4) Remove any weeds, wire, rope or other
AFTER USE to the MIN position.
tynes and rotor assembly.
material that may have wrapped around the tynes and rotor assembly.
Some engine applications use a material that may have wrapped around the
2) Allow machine to cool down.
tynes and rotor assembly.
Turn fuel tap to "OFF" position
5) Return wheel axle to forward position for
remote-mounted throttle control
5) Return wheel axle to forward position for
tynes and rotor assembly.
Allow machine to cool down (minimum 5 minutes)
rather than the engine- transport. Replace shaft locking collar.
5) Return wheels and depth control handle to
transport. Replace shaft locking collar.
3) Wash mud and dirt off of the garden tiller.
Clean with warm soapy water. Ensure no water
5) Return wheels and depth control handle to mounted lever shown here
transport position.
6) Return depth shoe (if equipped) to full Up enters the carburettor.
6) Return depth shoe (if equipped) to full Up
Ensure no water enters the carburettor.
b. Turn the engine switch transport position.
position.
to the OFF position. position.
4) Remove any weeds, wire, rope or other
c. Turn the fuel
valve lever to the
material that may have wrapped around the
OFF position
tynes and rotor assembly.
AFTER USE
5) Return wheel axle to forward position for
1)
transport. Replace shaft locking collar. Allow machine to cool down. Wash mud and dirt off of
the hydraulic trencher. Ensure no water enters the
carburettor
6) Return depth shoe (if equipped) to full Up
2)
Remove any objects that may have wrapped around
position.
the trencher chain or assembly.
© Copyright 2013, Red Roo Sales & Service Company Pty. Ltd.
© Copyright 2001, Red Roo Sales & Service Company Pty. Ltd.
© Copyright 2001, Red Roo Sales & Service Company Pty. Ltd.
© Copyright 2012, Red Roo Sales & Service Company Pty. Ltd. 1301-0069-A
© Copyright 2012, Red Roo Sales & Service Company Pty. Ltd. 1301-0069-A
NEVER operate the rotary hoe in an
enclosed area. Engine exhaust contains
WARNING! – IN CASE OF DIFFICULTY,
WARNING! – IN CASE OF DIFFICULTY,
carbon monoxide, an odourless and
WARNING! – IN CASE OF DIFFICULTY,
WARNING! – IN CASE OF DIFFICULTY,
RELEASE THE TYNE ENGAGEMENT
tasteless poison. DISENGAGE THE SAFETY CLUTCH
DISENGAGE THE SAFETY CLUTCH
RELEASE THE TYNE ENGAGEMENT
CONTROL LEVER. ALL TILLING ACTION
CONTROL LEVER. ALL TILLING ACTION
CONTROL LEVER. ALL TILLING ACTION
CONTROL LEVER. ALL TILLING ACTION
STOP the engine and disconnect the
STOPS. Turn the engine "STOP" switch
STOPS. Press the engine "STOP" button
STOPS. Press the engine "STOP" button
STOPS. Turn the engine "STOP" switch
spark plug lead(s) and allow engine to
to off located on the engine.
located on the engine.
located on the engine.
cool before inspecting or performing to off located on the engine.
NEVER operate the unit without the safety
maintenance on the rotary hoe.
guards in place and in working order. Keep
Refuelling
the unit well maintained and in good
* Shut off the engine. DO NOT REFUEL
working order.
AN ENGINE WHILE OPERATING!
* Allow engine to cool. Minimum 5 minutes
* USE UNLEADED FUEL ONLY.
Use clean, fresh unleaded fuel.
* Do not mix oil with unleaded fuel.
* Do not over-fill fuel tank. Allow space
for fuel expansion.
WARNING - KEEP HANDS AND FEET CLEAR
NEVER operate the rotary hoe in an
* Do not smoke.
OF TRENCHING CHAIN AND OTHER MOVING
* Allow no naked flame or hot material in refuelling area. PARTS AT ALL TIMES!
enclosed area. Engine exhaust contains
* Use only approved fuel containers and funnels.
WARNING! - In case of difficulty, release the carbon monoxide, an odourless and
NEVER insert hands or fingers into the cracks
Remember, fuel is a potential hazard
Safety Clutch Lever/Operator Presence Control
tasteless poison.
Turn fuel shut off valve to the "OFF"
of the log / wood during the splitting procedure.
Turn fuel shut off valve to the "OFF"
All trenching action stops. Turn the Engine
position.
Once the log / wood has been split return the
Stop button to STOP located either side on the You alone know the operational demands and
Turn fuel shut off valve to the "OFF" position.
STOP the engine and disconnect the
Turn fuel shut off valve to the "OFF" main control console or the engine. special conditions affecting the equipment in
position.
spark plug lead(s) and allow engine to
your situation and therefore assume the
position.
responsibility for developing, carrying out, and
cool before inspecting or performing
enforcing the safety concepts which apply to your
maintenance on the rotary hoe.
own operation to effect the greatest safety for
REFUELLING
yourself and the people around you.
* Shut off the engine. DO NOT REFUEL
AN ENGINE WHILE OPERATING!
* Allow engine to cool. Minimum 5 minutes
"The Right Way to Rent"
* USE UNLEADED FUEL ONLY.
Use clean, fresh unleaded fuel.
* Do not mix oil with unleaded fuel.
* Do not over-fill fuel tank. Allow space
for fuel expansion.
* Do not smoke.
* Allow no naked flame or hot material in refuelling area.
You alone know the operational demands and
* Use only approved fuel containers and funnels.
You alone know the operational demands and
special conditions affecting the equipment in
Remember, fuel is a potential hazard
special conditions affecting the equipment in
your situation and therefore assume the
your situation and therefore assume the
responsibility for developing, carrying out, and
You alone know the operational demands and
responsibility for developing, carrying out, and
enforcing the safety concepts which apply to your
special conditions affecting the equipment in
enforcing the safety concepts which apply to your
own operation to effect the greatest safety for
your situation and therefore assume the
own operation to effect the greatest safety for
yourself and the people around you.
responsibility for developing, carrying out, and
yourself and the people around you.
enforcing the safety concepts which apply to your
own operation to effect the greatest safety for
yourself and the people around you.
"The Right Way to Rent"
1301-0066-A
"The Right Way to Rent"
"The Right Way to Rent"

SAFETY PRECAUTIONS

SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
AND OPERATING
AND OPERATING
OPERATING
AND OPERATING
AND OPERATING
AND OPERATING
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS INSTRUCTIONS
TRANSPORT
Be sure Tyne Control Lever is set to "Neutral"
while loading and unloading the rotary hoe
and when moving to or from jobsite.
BEFORE USE
1)
Ensure that all grass and weeds have been cut
as low as possible.
.
2)
If the rotary hoe is to be used in clay or hard
ground conditions, it is recommended to water
the area thoroughly and allow sufficient time
OPERATING
for earth to soften.
3)
Police the area. Remove any
INSTRUCTIONS
foreign objects from the area.
4) Identify and mark the location of sprinkler heads,
gas pipes, telephone cables etc. TRANSPORT
Be sure Tyne Control Lever is set to "Neutral"
GT622
while loading and unloading the rotary hoe
GT622
and when moving to or from jobsite.
BEFORE USE
GARDEN
GARDEN
HYDRAULIC
GARDEN
1) Ensure that all grass and weeds have been cut
GARDEN
as low as possible.
.
TILLER
TILLER
2) If the rotary hoe is to be used in clay or hard
LOG SPLITTER
TILLER
ground conditions, it is recommended to water TILLER
the area thoroughly and allow sufficient time
GT622
for earth to soften.
3)
Commercial Environmental Equipment
GARDEN
Commercial Environmental Equipment
4) Identify and mark the location of sprinkler heads,
Commer cial Outdoor Power Equipment
gas pipes, telephone cables etc.
Commer cial Outdoor Power Equipment
Online Demonstration Available at:
1301-0018
1301-0018
www.redroo.com/products/logsplitter
™
™
™
™
™
HLS
GT5
GT5
Police the area. Remove any
foreign objects from the area.