Subscribe to Our Youtube Channel
Summary of Contents for Jumper JPD-FR203
- Page 1 JPD-FR203 0482 Infrared Thermometer Instruction Manual Shenzhen Jumper Medical Equipment Co., Ltd Manual Version: 1.0 Date of Issue: 2018/09/18...
- Page 2 No part of this document may be changed, excerpted, copied, reproduced, or imitated in any form or by any means without the prior consent of Shenzhen Jumper Medical Equipment Co., Ltd.
-
Page 3: Table Of Contents
Contents Unpacking Check.....................1 Package Contents..................... 1 Safety Precautions....................1 Warning......................2 Symbols......................3 Body Temperature Basics................4 Product Description..................5 Features......................6 Product Structure....................7 Display Description..................7 Sounds and Backlight Instructions..............8 Display and Operating Instructions..............8 Measuring Forehead Temperature..............15 Measuring Object Temperature..............16 Replacing Batteries..................17 Cleaning and Disinfection................ -
Page 4: Unpacking Check
In case of any damage or operation problem, please contact the dealer or contact Jumper directly. You will need the following information when making your claim: device model, serial number, purchase date, and your contact information and address. -
Page 5: Warning
you do physical exercises or get excited. Do not use the thermometer for continuous temperature monitoring purposes. Do not immerse the thermometer into water or other liquid. Clean and disinfect the thermometer as described in the "Cleaning and Disinfection"... -
Page 6: Symbols
Otherwise, the thermometer may be damaged permanently. During measurement, do not use a mobile phone or any other device that may cause electromagnetic interference. Do not use the thermometer in an environment where flammable anesthetic mixture with air or with oxygen, or nitrous oxide is available. -
Page 7: Body Temperature Basics
Symbol Description IPX0 Degree of protection against the Ingress of water. A personal injury or damage to the thermometer may occur if the thermometer is not used correctly. Warning Inaccurate reading or damage to the thermometer may occur if the thermometer is not used correctly. Attention Body Temperature Basics You can take a body temperature on the forehead, in the ear canal, under... -
Page 8: Product Description
1°C each day. Product Description Overview Infrared Thermometer JPD-FR203 measures the human body or an object temperature based on the infrared energy emitted by the forehead or an object (such as milk and water). You can quickly get measurement results after pointing the temperature probe to the target. -
Page 9: Features
Features 1. Good safety ● Passive infrared receiving technology ● Non-contact measurement, preventing cross-infection 2. Easy operation ● Handheld design, easy operation ● One-click automatic temperature measurement 3. Quick response 1-second measurement 4. High accuracy ● Advanced infrared temperature sensor, with high sensitivity ●... -
Page 10: Product Structure
Product Structure 1、LCD display 2、Power button / Measure button 3、Sound switch button 4、Memory button 5、Mode button(Adult forehead temperature 、Child's forehead temperature 、Object temperature) 6、Battery cover Display Description 1. Object temperature mode 2.Adult forehead temperature mode 3.Child's forehead temperature 4. Low power indicator 5.Mute / un-mute 6. -
Page 11: Sounds And Backlight Instructions
Sounds and Backlight Instructions Range Sounds Backlight Forehead temperature A long beep Green 35.0℃-37.5℃/95.0℉-99.5℉ A long beep Orange 37.6℃-37.9 ℃/99.7℉-100.2℉ 3 short double beeps 38.0℃-42.2℃/100.4℉-108.0℉ Object temperature A long beep Green 0℃-100℃/32.0℉-212.0℉ Note: When the temperature is between 35.0℃-37.5℃（95.0℉-99.5℉）, there will be a long beep and a Green backlight, Indicates normal body temperature. - Page 12 Operating Instructions/ Displayed Screen Display Description State Measuring Forehead temperature(Adult/child) Press the power button,then press the mode button, the thermometer enters the forehead mode, and the screen display Switch to adult or child measurement mode according to your measurement needs point the IR sensor to the center of the forehead.
- Page 13 Operating Instructions/ Displayed Screen Display Description State In a power-on state, press the “Mode button”, the thermometer enters the Object mode. Object temperature mode See the table in displayed on the screen. the “Sounds and Point the IR sensor to the center of Backlight the object, then press and release the Instructions”...
- Page 14 Operating Instructions/ Displayed Screen Display Description State In a power-on state, Press the measurement button for about 3 Silent seconds. You can switch units Switching between forehead temperature and object temperature In a power-on state, press the Mode button to switch between adult forehead temperature , child forehead temperature...
- Page 15 Operating Instructions/ Displayed Screen Display Description State In a power-on state, Press the sound switch button to A long beep switch the sound on or off, a long will be sounded beep will be sounded when the sound when the sound is turned on.
- Page 16 Operating Instructions/ Displayed Screen Display Description State In a power-on state, press the Memory button, Enter the memory mode. When leave memory button LCD display“01” followed by the recorded reading. Silent,the Press the “Memory button” again backlight is for the next recorded ,data 02 will be green shown, followed by the recorded reading.a maximum of 20...
- Page 17 Operating Instructions/ Displayed Screen Display Description State When the memory data is queried, When the power when there is no memory data under is turned back the current serial number, the display on, a long beep, is as shown. the backlight is Remove 2 dry batteries and re-install green, then turn the power to clear all memory data.
-
Page 18: Measuring Forehead Temperature
Measuring Forehead Temperature 1. When using the thermometer for the first time, move the battery’s insulating piece away. 2. Press the Power button to power on the thermometer. 3. When measuring adults, place the switching device in the "adult" mode. When measuring children, place the switching device in "child"... -
Page 19: Measuring Object Temperature
6. If no activity is detected, the thermometer will power off automatically in 10 seconds. Measuring Object Temperature Press the Power button to power on the thermometer. Press the Mode button, the thermometer enters the Object mode. The “ ” symbol is displayed on the screen. Point the thermometer probe to the center of the object, about 1-5cm away from the object surface. -
Page 20: Replacing Batteries
It is dangerous to make a self-diagnosis or self-treatment based on the obtained measurement results. For such purposes, please consult a doctor. Notes: (1) The thermometer is suitable for an indoor environment without strong air convection between the thermometer and the target. For example, winds from a fan, an air-conditioner, or a heater. -
Page 21: Cleaning And Disinfection
Make sure that the batteries are installed correctly. Otherwise, the thermometer may be damaged. If the low-battery symbol is displayed on the screen, replace the batteries. Batteries of a same type should be used. Dispose the used batteries in accordance with the local environmental policies. The thermometer is shipped with batteries. - Page 22 Keep water off the lens during the cleaning process. Otherwise, the lens may be damaged. The lens may be scratched if it is cleaned with a piece of tissue paper, which might result in inaccurate readings. Do not clean the thermometer with corrosive cleansers. During the cleaning process, do not touch the lens using hard objects, do not immerse any part of the thermometer into liquid, or allow liquid to penetrate the thermometer.
-
Page 23: Maintenance
thermometer and quickly dry it. Disinfect the thermometer body with a cloth slightly moistened with 75% medical alcohol. Do not use hot steam or ultraviolet radiation for disinfection. Otherwise, the thermometer may be damaged or quickly aged. It is recommended to disinfect the thermometer before and after each use. -
Page 24: Troubleshooting
Check regularly whether safety risks exist. Remove the batteries if the thermometer will not be used for more than two months. Troubleshooting Problem Possible Cause Solution Low battery the batteries. Change Polarities of the Make sure that the The thermometer batteries are reversed. -
Page 25: Specifications
Specifications Product Name Infrared Thermometer Product Model JPD-FR203 Power Supply Mode Internal power supply Operating Voltage DC 3V Battery Model AAA x 2 Operating Mode Continuous operating Display Segment LCD... -
Page 26: Security Class
Dimensions (mm) 151.8×36.2×35.3 Weight (g) 79 g (with batteries) Temperature: 10°C–40°C (50°F–104°F) Operating Humidity: 15%–95% RH, non-condensing Environment Atmospheric pressure: 86–106 kPa Temperature: -20°C to 55°C (-4°F–131°F) Storage and Humidity:0- 95% RH, non-condensing Transportation Atmospheric pressure: 50–106 kPa The infrared thermometer has been tested and conforms to the standard ASTM E1965-98. -
Page 27: Emc Information-Guidance And Manufacture's Declaration
DOCUMENTS. ● Portable and mobile RF communications equipment can affect Infrared Thermometer JPD-FR203. ● The Infrared Thermometer JPD-FR203 should not be used adjacent to or stacked with other equipment. Guidance and manufacturer´s declaration – Electromagnetic emission –for all equipment and systems Guidance and manufacturer´s declaration –... - Page 28 Guidance and manufacturer´s declaration – Electromagnetic immunity The Infrared Thermometer JPD-FR203 is intended for use in the electromagnetic environment specified below. The customer or the user of the Infrared Thermometer JPD-FR203 should assure that it is used in such an environment. Immunity...
- Page 29 JPDFR203,including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter. Recommended separation distance where p is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation distance in metres (m).
- Page 30 RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the JPD-FR203 is used exceeds the applicable RF compliance level above, the JPD-FR203 should be observed to verify normal operation.
-
Page 31: Warranty And After-Sale Service
using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer. NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. - Page 32 Shenzhen Jumper Medical Equipment Co., Ltd. Address: D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen, Guangdong, China Tel: +86-755-26696279 Fax: +86-755-26852035 Website: http://www.jumper-medical.com...
Need help?
Do you have a question about the JPD-FR203 and is the answer not in the manual?
Questions and answers