Eco Wash - Asko D1886 Use And Care Manual

ECO WASH

WASH ONLY WHEN FULL
Save energy by not running the machine until
it is completely full.
WASH AT LOWER TEMPERATURE
If dishware is only lightly soiled you can suita-
bly reduce the temperature for Intensive and
Normal wash to 55°C, and Quick wash to 45°C.
CONNECT TO COLD WATER SUPPLY
If the machine is connected to a cold water supp-
ly, running time will be longer because heating
of the water will take longer. The longer wash-
ing phase allows you to run a programme at a
lower washing temperature and still get the
same results.
However, if you are connected to a district
heating supply it will probably be more econo-
mical to connect the dishwasher to the hot wa-
ter supply.
SELECT A PROGRAMME WITHOUT DRYING HEAT
When washing is completed, leave the door ajar
to speed up the drying process by allowing moist
air to escape.
AVOID RINSING BEFORE WASHING
Thanks to the Super Cleaning System™, you
do not need to rinse your dishes under running
water before putting them in the dishwasher.
The machine always starts the main wash with
clean water and a clean machine.
USE AN ENVIRONMENT-FRIENDLY DETERGENT
Study the environment information on the packet.
14