Kromschroder UVS 10 Operating Instructions Manual

Uv sensor

Advertisement

Quick Links

8.2.1 Edition 08.10
D
GB
F
NL
I
TR
CZ
PL
RUS
H
 
Operating instructions

UV sensor UVS 10

Translation from the German
© 2008 - 2009 Elster GmbH

Contents

UV sensor UVS 10 . . . . . . . . . . . . . . . . . . . . . . 1
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Checking the usage . . . . . . . . . . . . . . . . . . . . . 2
Type code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
UVS 10 with UVS 1 adapter. . . . . . . . . . . . . . . . 3
Cable selection. . . . . . . . . . . . . . . . . . . . . . . . . 
Cable installation . . . . . . . . . . . . . . . . . . . . . . . 
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
UVS 10..G1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
UVS 10..P2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Replacing the UV tube . . . . . . . . . . . . . . . . . . . . 4
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Quartz glass lens with seals . . . . . . . . . . . . . . . . 5
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
E
DK
S
N
P
GR
www.docuthek.com

Safety

Please read and keep in a safe place
Please read through these instructions
carefully before installing or operating. Follow-
ing the installation, pass the instructions on to the
operator. These instructions can also be found at
www.docuthek.com.
Explanation of symbols
• , 1 , 2 ,  ... = Action
= Instruction
Liability
We will not be held liable for damages resulting
from non-observance of the instructions and non-
compliant use.
Safety instructions
Information that is relevant for safety is indicated in
the instructions as follows:
DANGER
Indicates potentially fatal situations.
WARNING
Indicates possible danger to life and limb.
CAUTION
Indicates possible material damage.
All interventions may only be carried out by qualified
gas technicians. Electrical interventions may only be
carried out by qualified electricians.
Conversion, spare parts
All technical changes are prohibited. Only use OEM
spare parts.
Transport
On receipt of the product, check that the delivery is
complete (see Part designations). Report any trans-
port damage immediately.
Storage
Store the product in a dry place. Ambient tempera-
ture: see Technical data.
GB-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UVS 10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kromschroder UVS 10

  • Page 1 On receipt of the product, check that the delivery is UVS 10..G1 ......3 complete (see Part designations).
  • Page 2 ▷ fications for automatic burner control units IFS, PFS, PFD, flame detectors IFW, PFF or burner Housing control units BCU, PFU. Cable gland UVS 10 with internal thread adapter  UV tube Adapter with quartz glass Plug Socket Retaining screw...
  • Page 3 PE wire. ▷ Signal line ≤ 2.5 mm². ▷ ▷ The cable gland on the UVS 10..G1 or on the ▷ socket of the UVS 10..P2 is suitable for cable diameters of 7 to 13 mm.
  • Page 4 Maintenance Assistance in the event of malfunction Replacing the UV tube ▷ The UV tube in the UV sensor must be replaced ▷ WARNING after approx. 10,000 operating hours (approx. 1 year) as its service life has expired (see “Ac- – Electric shocks can be fatal! Before working cessories”).
  • Page 5 ? No direct current although the flame is burning. Accessories ! The UV sensor is dirty, e.g. sooted. • Clean sensor or quartz glass. Adapter UVS 1 with quartz glass disc ! Humidity inside the UV sensor. • Vent sensor. ! The distance between the UV sensor and the flame is too great.
  • Page 6 Technical data Aluminium housing with integrated heat guard, with connection terminals. Clamping range of the connection terminals: ≤ 2.5 mm². Cable gland: for cable diameters of 7 to 13 mm. Distance between UV sensor and flame: 300 – 400 mm. UV tube: P578, spectral range: 190 –...

Table of Contents