App Overview; Accessories And Tools - Gallagher i Series Manual

4.3 App overview

Live data
Obtain live data from your solar station.
Figure 4.3: Screen view of (Android) smartphone
Viewing historical data
Simplify the diagnosis of your installation. Using the BlueSolar
MPPT chargers and the VictronConnect app, you can view the last
30 days' data at a glance.

5. Accessories and tools

5.1 Accessories
Art.nr. Description
303376 External display
507002 Remote control
510002 Fence monitor
579009 Alarm system
005215 Siren
005208 Flash warning light
511009 Warning light
EU warning sign -
075881
plastic
EU warning sign -
082216
aluminium
5.2 Gallagher tools
6. FAQs
How do I know whether the batteries are still functioning
correctly?
Using the VictronConnect app, you can check the voltage directly
on your phone. On the charge controller, the individual voltage
status can be checked by means of the LEDs. If the blue LED
flashes for 3 seconds, for example, there is not enough power
to charge the batteries. Further indications can be found in the
enclosed instructions of the Victron solar controller.
Do the batteries need to be recharged manually?
Manual charging of the batteries is usually not necessary! The solar
panels and the batteries are designed so that even long periods of
bad weather can be bridged. The solar controller detects whether
the batteries need to be charged or not and adapts accordingly.
It is very cloudy. Should I switch off the energizer?
No! You do not have to turn off the device, It can stay in operation
throughout.
Does the solar panel need extra maintenance?
MB2800i MB1800i
The solar panel should be cleaned regularly of dust and dirt. Use
only fresh water and a soft cloth.
√ √
How should I align the solar system?
The solar system must not be in the shade or under a tree. Align
not not
the solar panel with the sun for maximum exposure.
included included
Solar controller and the energizer are working but I have no
power on the fence.
not not
included included
This can have several causes:
•
not not
•
included included
ikke ikke
inkluderet inkluderet
The solar controller is working but the energizer is not.
•
ikke ikke
•
inkluderet inkluderet
not not
included included
not not
included included
not not
included included
Art.nr. Description
Ground drill ø10 cm
704668
Post Holer
017614 Post hammer
The solar station is switched off and must be switched on
using the key.
Earthing is insufficient or it is too dry. Ensure the ground is
moist and then try measuring again. You may have to add extra
2 m earth rods.
The flat fuse (30 A) is defective and needs to be replaced.
The battery is empty. Check whether there is still voltage
using the VictronConnect app. If there is no voltage, the
battery must be removed and recharged using a 12 V charger.
A conventional car battery charger is suitable for this purpose.
not included not included
not included not included