Advertisement
5. BUTTON FUNCTIONS
ON/OFF key：Turn the scale on/off, all segment and indicator LED are illuminated for
one second, during display test, all internal operation are checked and,
any non-conformance Error message will be displayed.
HOLD key ：Press HOLD to freeze the weight display on the scale and the HOLD light
will turn on. Press HOLD again to unfreeze the weight display and the HOLD
light will turn off.
TARE Key
:press TARE to tare or un-tare weight on the scale. If TARE is pressed and
tare light is on, the scale displays the net weight. On the other hand,
if TARE is pressed and tare light is off, the scale displays the gross weight.
ZERO key
:Re-zero key, use this key to return zero reading, the scale is in zero point.
6. OPERATING INSTRUCTION
6.1 POWER ON/OFF THE SCALE
■ Press ON key located in front of the scale.
The scale will perform self test on the WEIGHT DISPLAY and will be ready for weighing
when zero lamp is on.
(while the power is off, the ON/OFF key on the remote control wouldn't operate)
■ Use the ON/OFF on the remote controller when the power is on. Hook should be empty.
6.2 ZERO FUNCTION
■ Used to correct drifted zero value when the scale is unloaded and motion is not detected.
■ The function works when ZERO key is pressed, and the ZERO LAMP is on.
Example: If the weight has drifted, you can press ZERO key to bring back to the zero.
10kg on weight display will go to 0kg when you press the ZERO key.
6.3 TARE FUNCTION
■ Tare is the weight of container being used for a commodity.
The TARE key subtracts the weight of the container.
■ After handing a weight to be tared on the HOOK, press the TARE key. Then the scale will
memorize the weight of the tare and will display zero value "0"kg. The TARE lamp will
be on.
■ If you weigh items, you will see the net weight.
2008.4
JLG User Manual 5
Advertisement
