Advertisement
Assembled Grid Halves
Feed Horn
Tilt Adjustment Arm
IP-00031 Rev. B – 09/05 Page 2/2
Mounting Bracket
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: SALES@L-COM.COM PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.
Installation Instructions
Model: HG918G
2. Assemble antenna feed horn and attach to grid using
included hardware (see below).
Important Note: Feed horn must be orientated to grid
as shown for optimal antenna performance.
3. Attach Mounting Bracket to mast using included U-Bolts
and hardware. For up-tilt installations the tilt adjustment
arm should be on the bottom (as shown). For down-tilt
installations the tilt adjustment arm should on top.
4. Attach grid antenna to mounting bracket as shown.
Adjust antenna to desired tilt and lock into place using
nuts on the tilt adjustment arm.
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
Advertisement
