Download Print this page

Ashly CLX-52 Operating Manual

Compressor/limiter

Advertisement

Quick Links

CLX-52
Compressor/Limiter

Operating Manual

Ashly Audio Inc.
847 Holt Road, Webster, NY 14580-9103
Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739
www.ashly.com
All Trademarks referred to herein, are the property of their respective owners. R-042707
All Rights Reserved

Advertisement

loading

Summary of Contents for Ashly CLX-52

  • Page 1: Operating Manual

    CLX-52 Compressor/Limiter Operating Manual Ashly Audio Inc. 847 Holt Road, Webster, NY 14580-9103 Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739 www.ashly.com All Trademarks referred to herein, are the property of their respective owners. R-042707 All Rights Reserved...
  • Page 2 Page - 2 Operator Manual – CLX-52 Compressor/Limiter Copyright© 2006 – Ashly Audio Inc.
  • Page 3 Operator Manual – CLX-52 Compressor/Limiter The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • Page 4 CLX-52 – 5 Congratulations on your purchase of the Ashly CLX-52 Peak Compressor/ Limiter. The CLX-52 was designed to meet the need for universal peak-sensitive automatic gain control Connectors & Cables – 5 (AGC) devices with exceptional audio performance and rugged durability. The CLX-52 has...
  • Page 5 Operator Manual – CLX-52 Compressor/Limiter A great deal of time was spent developing a wide-bandwidth, ultra-low-distortion, low noise VCA (voltage controlled amplifier). The result is the CLX-52, a versatile and highly listenable compressor/limiter suitable for use in professional sound reinforcement, recording and broadcasting.
  • Page 6 For unity gain, set the control to 0. A unique feature of Ashly Compressor/ Limiters is the incorporation of a double release-time constant. When a conventional compressor/limiter is adjusted for slow release times, transients such as mic “pops” may cause a severe reduction in gain followed by a slow fadeup, making the action of the limiter very obvious.
  • Page 7: General Requirements

    General Requirements The CLX-52 has specific physical, electrical and signal requirements for proper operation. These requirements will vary depending on your specific application, setup, and the settings on the unit. When setting up and testing your system, please take special care to double check all connections and settings.
  • Page 8: Stereo Operation

    To prevent distortion while preserving dynamic range set the CLX-52 as follows: Gain = 0, Threshold = 2-3 dB below recorder input max, Ratio = 10, Attack = 2 mS, Release = .2 Sec, Output = 0. Every situation is different, so experimentation before final recording is always a good idea.
  • Page 9 Note: Unshielded cables, improperly wired connections, and cable with broken strands (shorts, etc.) are the most common problems. Make sure you use good quality cable with connectors soldered firmly on the correct pin. When in doubt, get in touch with your Ashly dealer.
  • Page 10 Distortion Output Hum & Noise Power Requirements Shipping Weight Dimensions Note: 0dBu = 0.775 Vrms Operator Manual – CLX-52 Compressor/Limiter 200 μS - 20 mS 100 mS – 3 Sec - to +18 dB 20 K balanced 132 servo-balanced 20 Hz - 20 kHz, ± 0.2 dB <.01% THD, 0dBu, 1KHz...
  • Page 11 Any implied warranties which may arise under the operation of State law shall be effective only for FIVE years from the date of purchase of the product. Ashly Audio shall be liable only to correct defects in the product itself, and not for any damage or injury which may result from or be incidental to or a consequence of such defect.
  • Page 12 Copyright© 2006 – Ashly Audio Inc.