Page 4
• Before you tighten screws, align vertical axis from the EAST-WEST side and the NORTH-SOUTH as shown in the figure 8pcs (M12x20mm) 5pcs M8x120mm 5pcs M8 10pcs for M8...
Page 24
Before wiring junction box, take out the transparent fuse so indicator on connection board turns off. power supply motor A RS485 Before you connect power system be aware of plus and minus in a right terminal. Connect one wire into the plus and the other one into the minus!
Page 25
FIRST CONNECTION OF TRACKER TO A PC OVER AN USB CONNECTION DRIVER INSTALLING • Connect your PC to the tracker using the enclosed communication cable. Use the USB port on your computer. • Computer will require its driver installation. Let windows choose your driver automatically.
Page 30
H/V aligment: Adjust motor to total horizontal position. Motor...
Page 32
Place and date of issue Director of Sat Control d.o.o. Bogdan Bolka _______________________________ Cerklje, 1st June 2010 (name, function) (signature, stamp) 027- 2310 Declaration of conformity no: . File name: Declaration of Conformity for Solar Tracker - SunTracer SM44M1V3P and derivates dated 01-06-2010.doc...
Need help?
Do you have a question about the Solar Tracker and is the answer not in the manual?
Questions and answers