RADIOMODE
Basicradiomodefunctions
The earphones must always be plugged in for radio mode, as
the cable acts as the FM antenna.
Selectingtheradioinputsource
1 Open the main menu in the current playback mode by press-
ing and holding »●«.
2 Select the »Radio« operating mode with »
activate with »●«.
Note:
When the player is used in radio mode for the first time, it
■
performs an a utomatic station search and stores all avail-
able FM stations on presets (up to 20). Please wait until
the search is finished. The station stored at preset p osition
1 (NO: 1) is played.
Switchingbetweenmanualandpreset
mode
In radio operation, the player has two operating modes:
Manual tuning and p reset mode, i.e. stored radio stations.
A "preset" is a radio station which is saved on a button.
1 To switch between manual and preset mode, briefly press »●«.
– D isplay: the frequency, or the frequency plus the preset
number, e.g. »Preset NO: 1«.
12
ENGLISH
------------------------------------------------------------------------------------------------------------------------------------------
–
« or »+« and
Radio
Tuningtheradiostationsmanually
The player must be in manual tuning mode.
1
To set the frequency you want, press » « or » « as often as
necessary.
– The frequency changes in steps of 100 kHz;
or
start the search by pressing and holding » « or » «.
– T he search stops when a station with a strong signal is
found.
Tuningandstoringtheradiosta-
tionswiththeautomaticstation
search(AutoScan)
1 Open the FM menu by briefly pressing »
2 Select the »ATS« option with »
»●«.
Radio
Delete
ATS
Radio record
– T he automatic station search begins and saves up to 20
stations with the best reception as presets.
Storingradiostationsmanually
The player must be in manual tuning mode.
1
Tune in to the station you want.
2 Open the FM menu by briefly pressing »
3 Press »
–
« or »+« to select the »Save« option and activate
with »●«.
Radio
Save
ATS
Radio record
– T he current radio station is saved on the next preset. The
player switches to preset mode and the occupied preset,
»Preset NO: 10« for example, is displayed.
8
«.
–
« or »+« and activate with
8
«.