Polk Audio SPS-1 Instructions Manual

SPS-1
POWER SUPPLY FOR
LC -IP SPEAKERS
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, this
apparatus should not be exposed to rain or moisture and objects
filled with liquids, such as vases, should not be placed on this
apparatus.
16. To completely disconnect this equipment from the mains,
disconnect the power supply cord plug from the receptacle.
17. The main plug of the power supply cord shall remain
readily operable.
Product Disposal - Certain international,
national and/or local laws and/or
regulations may apply regarding the
disposal of this product. For further
detailed information, please contact the
retailer where you purchased this product
or the Polk Audio Importer/Distributor in
your country. A listing of Polk Audio
Importer/Distributors can be found on the
Polk Audio website www.polkaudio.com
or by contacting Polk Audio at 5601
Metro Drive, Baltimore, Maryland
21215, USA—Phone: +1 410 358-3600.
TAKE INVENTORY
Inside each SPS-1 container, you should find:
1. SPS-1 power supply
2. Removable IEC power cord
3. Two 4-pin male Euro Style Connectors
4. SPS-1 Manual
5. Registration Card
REQUIRED TOOLS
1. Miniature flathead screwdriver
2. Wire strippers
3. Phillips screwdriver (for fuse replacement)
Important Note: Save all packing materials included with this
SPS-1 power supply in the event it should ever become necessary
to ship the unit for service.