BATPINIR
3
- 1 - INTRODUCTION
1.1 DESCRIPTION
BATPINIR is a battery-powered projector with LED light source designed to revolutionize the concept of
accent lighting in temporary applications. The high-efficient optical system has been studied by combin-
ing a 2W white LED chip with a special 5° lens, resulting incredibly bright, compact and energy-saving. The
battery life of 6 hours and the remote control of the fixture through IR, makes BATPINIR ideal for many ap-
plications such as centerpieces or accent-lighter for weddings, conferences, showrooms, clubs. The hang-
ing hardware provides two possible mounting solutions, magnet for fast application on any metal surface
or with a scissor clamp for mounting on ceiling rails. BATPINIR also provides for the application of filters
or color temperature correction by selecting different shades of color. BATPIN is available in a single pack-
age, or in the set version PIN6PACK which includes six pieces in a carrying case with collective charger and
color gel kit.
1.2 TECHNICAL SPECIFICATIONS
Light source and optics
• 1x2W Cold White LED
• Beam angle: 5°
• Field angle: 10°
• Included filter gel: warmwhite, red, green, blue, yellow
• LEDs average life span:> 50,000 hours
Electronics and features
• 100% working wireless with lithium battery and IR control
• Lithium battery is long-lived, rechargeable, lightweight
• Electronic protection for battery management allows you to extend the life and increase the recharge
cycles
• Battery life: 6 hours
• Charging time: 3 hours
• Mode IR: Built-in infrared receiver for remote controller
• Frequency diode anti-flicker (400Hz) for camera recordings
Structure and Power supply
• Cast aluminum body, degree of protection: IP33
• Scissor clamp with eye loop to hang on every ceiling track
• Magnetic base to attach the pinspot on every metal surface
• Power supply: DV 9V 1000mA (external)
• Average consumption: 13 W
• Weight: 0,3kg
• Dimensions (WxHxD): 190x88x58mm
• Weight PIN6PACK: 3.5Kgs
• Dimensions PIN6PACK: 794x300x85mm