Advertisement
Thereafter we place the BS-469 board on the
panel as shown in Figure 4.
Figure 4: "Mounting" the BS-469 board.
REGISTRATION OF DEVICE
When the panel starts and the device BS-469 is installed, you will receive the
following error.
To register the device we must enter the menu.
INSTALLATION
After the detection the device wiil work normaly.
CONNECTING OF ZONES AND FUNCTION
For installation and functions of zones please read the manuals of BS-468 panel.
WARRANTY
Olympia Electronics guarantees the quality, condition and operation of the goods. The period of
warranty is specified in the official catalogue of Olympia Electronics and also in the technical leaflet,
which accompanies each product. This warranty ceases to exist if the buyer does not follow the
technical instructions included in official documents given by Olympia Electronics or if the buyer
modifies the goods provided or has any repairs or re-setting done by a third party, unless Olympia
Electronics has fully agreed to them in writing. Products that have been damaged can be returned to
the premises of our company for repair or replacement, as long as the warranty period is valid.
Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge
the buyer depending on the reason of defection. Olympia Electronics reserves the right to charge or
not the buyer the transportation cost.
HEAD OFFICE
72
km. O.N.R. Thessaloniki-Katerini
nd
P.C. 60300 P.O. Box 06 Εginio Pierias Greece
www.olympia-electronics.gr
info@olympia-electronics.gr
Page 2 of 2
ERROR
EXPANSION 02
UNREGISTERED
SYSTEM
DETECTION OF EXPANSIONS
Then fasten the 4 screws which are inside the
bag (Figure 5).
Figure 5: Installing the screws on the BS-469
board
921469000_09_002
Advertisement
