ILLUSTRATION OF PARTS A. NEBULIZER COMPRESSOR UNIT 1. Compressor 2. Air Outlet 3. Power Switch 4. Power Cord 5. Air Filter NEBULIZER ASSEMBLY AND ACCESSORIES ILLUSTRATION 1. Tubing 2. Nebulizer Cup 3. Nebulizer Insert 4. Nebulizer Cap...
Page 17
INTRODUCTION This nebulizer is a portable medical device intended to aerosolize physician-prescribed medication which Is Inhaled through a mouthpiece or mask. A nebulizer may be used Instead of a metered dose inhaler. The device consists of a compressor unit and nebulizing attachments.
Page 18
4. If using the mask, press it directly into the adapter›s larger end and then press the adapter›s other end firmly into the outlet of nebulizer cap. The adapter is designed to fit tightly (Figure 4). MASK 5. If using the mouthpiece, attach it to the tee by pressing firmly into it, then attach this assembly to the nebulizer outlet by pressing firmly into the nebulizer cap.
4. Hold the air intake near the nose (Figure 1-10). If using an optional mask, put the mask on the face (Figure 2-10). If using a mouthpiece, hold it in the mouth {Figure 3-10). 5. Inhale the liquid medication moisture. 6.
MAINTENANCE AIRFILTER: The airfilteron the top panel of the compressor unit is bright white when new. With use, it will turn grey, which means it is time to replace it. It must be replaced immediately if it gets wet or becomes clogged. The air filter lasts up to 500 hours of use before replacement.