Subscribe to Our Youtube Channel
Summary of Contents for Marina Hang On Holding and Breeding Box
- Page 1 Hang On Holding and Breeding Box Instruction Manual Bac de reproduction à suspendre Mode d’emploi 2 L (0.5 US gal.)
- Page 2 PARTS DIAGRAM / SCHÉMA DES PIÈCES ENGLISH FRANÇAIS Cover Clasps Pinces de retenue pour couvercle Cover Couvercle Partition Plates Séparateurs Slit plates for discharging water Plaquettes avec interstices pour (1 thin frame – 4 bars, l’évacuation du surplus d’eau 1 thick frame – 2 bars) (une à...
-
Page 3: Parts Diagram
CAUTION! This aquarium is a breeding box for aquarium fish. DO NOT use this aquarium for other than its intended use. You need an air pump (discharge rate: less or equal to 1 L/ per minute) and an extra airline tube. (Sold separately) Turn the power off before performing maintenance. - Page 4 3. Attach an O-ring to the intake tube and slide them into the Discharge Cap extension tube. Then slide the airline tube into strainer, and attach them to the extension tube. Attach a discharge cap to the top of the intake tube. Make sure the discharge spout faces downwards.
-
Page 5: Maintenance
• DO NOT breed too many fish in the breeding box. It may cause a lack of oxygen. • When room and water temperatures are extremely less than different, room temperature may have an effect on 5 cm (2”) water temperature in the breeding box. Provide your full attention to the breeding box during summer and winter months Main...
Need help?
Do you have a question about the Hang On Holding and Breeding Box and is the answer not in the manual?
Questions and answers