Summary of Contents for Metra Electronics Spyclops PRO MTH1291
- Page 1 Quick Start Guide Please read the Quick Start Guide fully before using the product and keep it for your records. Related tools and documents of products, please download from http://www.spyclopsusa.com.
-
Page 2: Safety Precautions
Statement Thank you for purchasing our products, if you have any questions about setup or product use, please contact support. This manual is used for NVR's. Safety Precautions Please modify default password immediately after the equipment is installed, to avoid unauthorized access. - Page 3 NVR Quick Installation Guide This NVR is convenient can be easily installed, plug and play and no complex setup needed. Installation Preparation Install NVR hard drive. Make sure all power is disconnected before installing. Installation tools: Phillips screwdriver (Please use surveillance grade hard disk drive only to avoid poor drive performance) （1）Unscrew the screws on the back and sides of （2）Connect one end of the hard disk power cable the chassis and remove the cover.
-
Page 4: Interface Description
NVR Illustration Interface Description Icon Name PoE NVR rear panel DC Power Input AC Power Input Power switch HDMI Ethernet WAN/LAN Non-PoE NVR rear panel A-IN Audio Input Audio Output A-OUT Alarm-IN Alarm In Alarm-OUT Alarm Out RS485 RS485 RS232 RS232 NVR rear panel interface is similar with pictures above, but the product appearance, including buttons, interfaces and layout are for reference only and may differ from the product you have purchased. -
Page 5: Quick Configuration
Step 3: Set the security question, select the security question 1, 2, 3 by the pull-down operation, and set the answer to the corresponding security question. Step 4: Insert the USB flash drive into the device, and click "Export Key > Comfirm > Save". The password is changed. -
Page 6: Recording Configuration
Add IP Device Before accessing the IP channel, make sure that the NVR network connection is correct and valid. Step 1: On the preview interface, right-click to enter the menu, and click " ". Step 2: Add IP camera automatically or manually. Automatically added, click "Auto add" button. Manually added, click "Search", the Device Search interface automatically searches for the devices in the LAN with the "Onvif And Private"... -
Page 7: Instant Playback
Playback Instant playback Step 1: On the preview interface, click the preview channel, the control bar will pop up below the channel. Step 2: Click " " to enter the instant playback interface, can play the first 5 minutes of the current channel video. -
Page 8: Smart Event
Normal Event Step 1: On the preview interface, right-click to enter the menu, and click " > Normal Event" to enter the Motion detection interface. Step 2: Choose "Event Type > Channel > Enable" and set the corresponding alarm parameters. The device's normal event... - Page 9 Browser NVR Login １. Login to NVR on LAN (PC & NVR connected to same router LAN) 1. Make sure the NVR and the connected PC (computer) are in the same segment. If not, please set IP address of your PC to the same segment as the XVR’s, for example ‘192.168.1.33’， but it must be different IP as the XVR’s. ( Note: NVR default IP address is 192.168.1.88).
- Page 10 Mobile App Access Download and install SpyclopsPRO on a smart phone or tablet using either option below: 1. On the Android App Store or iPhone App Store enter “SpyclopsPro” search, download and install. 2. Scan the following QR codes to download and install the App. Android Run the SpyclopsPRO App (new users need to register an account to log in first).
- Page 11 8.1 Tap the device you would like to add 1. Tap in the upper left menu 9.1 Enter the username and password and tap Done. 2. Tap "Device" bar ; 9.2 Enter your choice of Device name, select the group 3.
- Page 12 4. Swipe left or right on the time line to change the recording time view. Note: Green bars are recording from schedule and Red is from motion detection. ©2020 Metra Electronics Corporation 460 Walker Street, Holly Hill, FL 32117-2699 Sp Specifications are subject to change without notice.
Need help?
Do you have a question about the Spyclops PRO MTH1291 and is the answer not in the manual?
Questions and answers