The Handy 10794 Manual

Thank you for purchasing our new Multi-Use Head
Magnifying glass. This innovative glasses type mag-
nifier, with headband and 2 LED lights, can be easily
used for reading books, reading newspaper, drawing,
handicraft, tailoring, viewing flowers and plants, and
so on.
Please read the user guide carefully before the first
usage.
• With two LED lamps
• The efficiency of the LED lamp is 10 times more
than any ordinary bulb, so this item is ECO-friend-
ly and energy saving
1. Fixing band
2. Head band
3. Plug-in hole for lens
4. Light switch ON/OFF
5. Lens Adjusting screw
3.
Features:
This product is a super-light head magnifying of wide
scope of vision with lens and LED light (Weight: about
100 g).
This product is developed and produced according to
many years of experience of our company. It is suita-
ble to use by technicians from various fields or by any-
body who works in precise production fields.
Due to its simple use, it is widely used in manufactur-
ing and processing small products, repairing cameras,
electric products, electronic parts of vehicles and com-
puters, and so on.
It's also suitable for dentists, veterinarians, and beauty
industry workers, jewel productions, sewing, embroi-
dery processes, stamp collectors, or just for reading,
drawing, and so on. You can also see small things
without your magnifying glasses with the help of our
multi-use product. If you turn the light on, you can
light your way up while going ont he road in the dark.
The surface of lens has been processed specifically, if
its surface is dirty, please clean with a soft cloth and
apply only alcohol or warm water.
* Note: Please avoid using any chemical detergent be-
cause they can deteriorate the surface of the lens.
I. Usage of the light:
1. Referring to figure on the left, please adjust the
UP and DOWN button. (ON – OFF)
2. You can also turn the light left or right, and up-
ward or downward.
1.
2.
4.
5.
II. Change of the batteries:
1. When changing the battery, please open the
hole to 10 mm width and 10 mm height, to the
position which is about 4 mm. Open the battery
cover with the signal A and the word OPEN, and
press there with the top of a pen, thus, the cover
will pop out, then open the cover by your hand.
2. After inserting the new batteries, close the bat-
tery cover.
3. Use only 2 x AAA type batteries.
4. Please get rid of the used batteries in accordance
with your local stipulations.
5. The switch is marked with ON and OFF for use,
please refer to figure.