Install External Speaker; Menu Operations; Vox Function; Talkback Level - Danita 340 Manual

3.9 ......................................................................................................

※VOX function

The VOX function allows transmitting by speaking into the original
microphone without pressing the [PTT] switch.
Press [PTT] +
icon " ", and then press [PTT] +
microphone icon disappeared.
Note: When VOX is turned on, the micropphone symbol flashes in LCD .

※Talkback Level

This function allows you to adjust the volume of your walkie-talkie.
(1)
Start the intercom function (see "intercom" on page 8).
(2)
Hold down the [PTT] switch, then the
decreases the Talkback Level.
(3)
Release [PTT] switch and save Talkback Level.
※Functions (long press)
Long press
※Norms Control
(1)
Hold to power on radio, until LCD displays the norms.
Short press microphone [ UP ] or [ DN ] to choose wanted norms.
(2)
(3)
Power off and power on again.

3.10 Install External Speaker ..............................................................

Choose a 8Ω external speaker with 3.5mm mono connector.

3.11 Menu Operations ..........................................................................

(1)
Long press
Short press microphone [ UP ] or [ DN ] or
(2)
be.
(3)
Short press
function, the parameter blinks on LCD.
Short press microphone [ UP ] or [ DN ] or
(4)
setting.
5
key to activate VOX function, LCD displays microphone
key to enter in memu and set different function.
key to enter menu list.
key to enter function setting parameter of the chosen
key to disable VOX function. The
key increases or the
or
or
danita 340 CB Radio
key
to choose menu to
to choose wanted