RONDO 3 Charging RONDO 3 Plug the USB cable into Switch off RONDO 3 and place it in the the charging pad. exact centre of the charging pad, with the MED-EL logo facing upwards. Plug the other end into the wall plug...
Page 5
Alternatively, you can use the Make sure RONDO 3 is placed RONDO 3 charging cable and a correctly onto the charging pad. power bank to power RONDO 3. The MED-EL logo must be facing Open the rubber socket cover and upwards.
RONDO 3 Switching On RONDO 3 White Indicator Light Press the on/off button in the The main indicator light will fade centre of the audio processor for in white. The audio processor is approximately 2 seconds. now turned on.
Page 7
Green activated, the indicator light will Indicator Light blink red. The indicator light will blink green when RONDO 3 is correctly positioned on your head. RONDO 3 should be placed over your implant, with the MED-EL logo against your head and the...
RONDO 3 Checking the Battery Status Make sure RONDO 3 is Briefly push the on/off button. The main switched on. indicator light will blink to show how much battery charge is left. Blinking pattern Meaning Required action Battery fully charged (75 % to 100 %)
Gently lift until it snaps into place. up to remove the cover. The cover should be changed every three months to maintain best possible hearing with RONDO 3.
. Lift the arrow on the tool pointing to magnet out of RONDO 3. the locked symbol MED-EL strongly recommends that you do not change the magnet yourself. Contact your clinician to have the magnet changed or if you experience any skin irritation.
Page 11
Pick up the new magnet with the tool, making sure the arrow on the tool is over the white bar on the magnet. Place the magnet into the processor, with the arrow pointing to the unlocked symbol Turn the tool to point to the locked symbol...
RONDO 3 Using Attachment Clips There are three available clips: the hair attachment clip with bracket, clothing attachment clip with bracket, and clothing attachment clip with cap. Using Attachment Clips with Bracket Push one lip and then the other lip of the bracket into the grooves on either the left or right side of the rubber socket cover.
Page 13
Using Attachment Clips with Cap Hold the audio processor face up in one hand, and hold the cap between the forefinger and thumb in your other hand. Slide the cap onto the audio processor so that one lip and then the other lip are pushed into the grooves furthest away from the rubber socket cover.
Activate or deactivate connection with AudioLink. Keypad Lock Press for several seconds to lock or unlock the keypad. Processor Selection Select left, right, or both audio processors Please note, for RONDO 3 the MT button has a monitoring mode function only.
Page 15
Pairing the FineTuner Echo Changing the Battery 1. Switch off RONDO 3. Place it on the 1. Using a coin, turn the battery back of the FineTuner Echo. compartment cover until it points 2. Switch on RONDO 3. It will pair to the symbol.
RONDO 3 Using AudioKey The AudioKey app can be used to control your RONDO 3 from your phone, and has several other useful features. – Control the volume, audio sensitivity, and other settings straight from your phone. – Find your lost RONDO 3 with the “Find My Processor”...
Connecting via AudioLink AudioLink is a pocket-sized universal connectivity device that can be used to wirelessly stream phone calls, audio, and music to your RONDO 3. – Make phone calls from your Android, iPhone or any other smartphone. – Listen to music from your phone or music device.
RONDO 3 Using the Telecoil Adapter RONDO 3’s telecoil adapter is a plug-in device that allows you use hearing loops in public venues as well as telecoil-enabled phones. Remove the audio processor from your head. Open the rubber socket cover.
RONDO 3 Attaching WaterWear Make your RONDO 3 waterproof with WaterWear, and enjoy the water activities you love. – WaterWear makes your processor completely waterproof. – Can be used in fresh-, salt-, and chlorinated water. – The WaterWear covers are reusable up to 3 times.
RONDO 3 Activating the Flight Mode Activate the flight mode whenever you board a flight or enter an environment where RF transmissions are prohibited. 1. Switch off the audio processor and wait at least 2 seconds. 2. Switch on the audio processor and wait until the main indicator light blinks blue for the first time.
5. If the green light still does not flicker, charge your audio processor fully and try again. 6. If your RONDO 3 is still not working correctly, contact your CI centre for assistance. For more troubleshooting advice, please see your...
RONDO 3 Light Patterns Audio processor status Meaning Remarks ON indicator light The white light fades in or out when pressing the pushbutton in the centre OFF indicator light of the audio processor. Programme 1 to 4 selected The blue indicator light will blink depending on the selected programme (i.e.
Page 23
Flight mode Meaning confirmation pattern Flight mode successfully activated Charging indicator light Meaning Remarks Audio processor battery is The light goes off when the battery charging is fully charged. Scale in Seconds...
Link Monitoring Meaning Remarks pattern After placing an audio processor programmed for Applicable only to previous a previous generation implant (e.g. C40+, C40) generation implants over the implant: Indicates functionality of the (e.g. C40, C40+) audio processor. After placing an audio processor programmed Applicable only to PULSAR, for a new generation implant over the implant: SONATA, CONCERTO,...
Page 25
Link Monitoring Meaning Required action Remarks pattern Audio processor and Position the audio If the blinking persists, implant disconnected processor over the contact your clinic, audio- implant site. logist or MED-EL. The audio processor will automatically Audio processor Position the audio power off after 5 minutes (no positioned over wrong processor over the...
RONDO 3 Cleaning RONDO 3 Your audio processor is designed for durability and reliability. When handled with sufficient care, it will function for a long time. – Thoroughly wipe the external parts of your audio processor with a damp cloth at least once a week and let them dry completely.
Need help?
Do you have a question about the RONDO 3 and is the answer not in the manual?
Questions and answers