Dungs VI Series Installation Instructions

Visual Indicator
Installation Instruction
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Attention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Models Designations And Ranges . . . . . . . . . . Page 2
Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2

Approvals

Approval for this part is covered
under the safety valve certification.

Attention

Explanation of symbols
1, 2, 3 ... = Action
• = Instruction
1 ... 2
USA CDN
The installation and maintenance
of this product must be done
under the supervision of an ex-
perienced and trained specialist.
Never perform work if gas pres-
sure or power is applied, or in
the presence of an open flame.
Please read the instruction be-
fore installing or operating. Keep
the instruction in a safe place. You
find the instruction also at www.
dungs.com. If these instructions
are not heeded, the result may
be personal injury or damage to
property.
Any adjustment and application-
specific adjustment values must
be made in accordance with
the equipment manufacturers
instructions.
Safety
first
O.K.
IFGC
CSA
UL
ANSI
NFPA
On completion of work on the
Visual Indicator, perform a leak-
age and function test.
This product is intended for
installations covered by, but not
limited to, the following codes
and standards: NFPA 86, CSD-1,
ANSI Z21.13, UL 795, NFPA 85, or
CSA B149.3.