Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Independence Evo CROSS 100
- Page 1 Owner´s manual version 1.1 - 06.06.2012 Rescue system Evo CROSS 100 Evo CROSS 120 Evo CROSS 160 Fly market GmbH & Co. KG Am Schönebach 3 D-87637 Eisenberg Tel.: +49-8364-9833-0 Fax: +49-8364-9833-33 Mail: info@independence-world.com...
-
Page 2: Table Of Contents
Inhaltsverzeichnis 1. Technical Data 2. Purpose 3. Conditions of use 4. Necessary documentation 5. Mode of operation 6. Inspection of the parachute 7. Behaviour if damages are noticed 8. Storage 9. Maintenance 10. Cleaning 11. Repairs 12. Nature and environment friendly behaviour 13. -
Page 3: Technical Data
The manufacturer can not be made liable for any possible damages to persons or material damages, which may result from this rescue parachutes in any way. 1. TECHNICAL DATA Type: Evo CROSS 100, 120, 160 Manufacturer: Fly market GmbH & Co. KG Am Schönebach 3 D-87637 Eisenberg Tel. -
Page 4: Purpose
2. Purpose The emergency parachutes are manually-released parachutes for paraglider / hangglider pilots in an emergency situation while flying. 3. Conditions of use Maximum speed for usage: 115 km/h (32 m/s) Interval for repacking: 12 month, then the rescue parachute has to be repacked and this repacking has to be recorded in the “Repack and inspection log book”. -
Page 5: Storage
8. Storage Oil, grease, acid and paint should not be stored near the parachute. The storage space should be dry. Parachutes which have not been used for a long period of time should be opened and the canopy loosely rolled and stored in a bag. Avoid unnecessary high temperature (e.g in a parking car)! 9. -
Page 6: Structure Of The Parachute
15. Structure of the parachute The parachute structure is square and has, depending on the model 16 or 20 gores (see “technical datas”) The canopy is made of tear restistant, high strenght nylon fabric. The main seams are flat fell seams and are reinforced by a band. -
Page 7: Packing The Parachute
16. Packing the parachute 1. Slide on the packing loops on a line (packing cord). The 2. Separate the lines left and right the center lines (marked packing loops are colored to find them more easy. At the yellow) and check that they are not crossed and running corners they are green, yellow on the sides. - Page 8 7. Arrange panel 7. (Evo Cross 160: panel 9/8) 8. Arrange panel 6 and upper part of panel 5 to the side. (Evo Cross 160: panel 7, upper part of panel 6) 9. Arrange panel 5 (corner panel) (Evo Cross 160:panel 6) 10.
- Page 9 13. Arrange panel 1 (corner panel) and place a packing 14. Fold the left side onto the right side. weight onto the peripery. 15. Place panel 9 (Evo Cross 160: panel 11) centered to the 16. Arrange the upper part of panel 8 (Evo Cross 160: panel the floor and arrange panel 8 (Evo Cross 160: panel 10) to 10) to the side.
- Page 10 19. Arrange panel 5 (corner panel) (Evo Cross 160:panel 6) 20. Arrange panel 4 and upper part to the side. (Evo Cross 160: panel 5) 22. Arrange panel 2 and upper part of panel 1 to the side. 21. Arrange panel 3. (Evo Cross 160: panel 4/3) Schematic Schematic illustration...
- Page 11 Schematic Schematic illustration illustration S-fold S-fold 25. Fold left side S-shaped. (Step 2) 26. Remove packing cord. Version a) pocket deployment bag (standard version): 27a. Stow top of the canopy in the deployment bag. 28 a. Fold the rest of the canopy in small S-folds and place it in front of the deployment bag.
- Page 12 Version b) hybrid deployment bag (optional): 27 b. Stow top of the canopy in the deployment bag. 28 b. Fold the rest of the canopy in S-folds (stack-pack). 29 b. Bundle the lines in 3x3 “8-shaped” hanks. Do not 30 b. Close the deployment bag with the lines. First the bundle the last 70 cm of lines.
-
Page 13: Mounting In An Outercontainer
17. Mounting in an outercontainer 1. Connect the release handle at the loop in the middle of 2. Close the two lateral flaps of the outercontainer with two the deployment bag. Place the bridle at the side of the packing-cords and closed it with the pins of the handle container which you prefer. -
Page 14: Mounting / Integration To A Harness
18. Mounting / integration to a harness 18.1. harnesses without integrated rescue system container: If the harness does not have an integrated rescue system container use one of the outercontainer which is shown at point The outercontainer shown at point 15 has got several loops, eyelets and velcro-tapes on it´s back side to attach it at the harness. -
Page 15: Specialtities For Paraglider´s Winch Towing
Cloverleaf deployment bag packing with lines bundles on the bottom of the container: Closure loop cloverleaf deployment bag Lines Canopy in S-folds (stack pack) Basis Cloverleaf container Bridle Bottom of container Lines hanks Cloverleaf deployment bag Closure loop cloverleaf deployment bag packing with lines bundles on top of the canopy: Lines Fangleinenbündel...